Skip to content

Quality Inspector · How-to guides

Create a Re-test in Quality Inspector

Last updated October 20, 2025

A re-test is used when the outcome of an initial inspection is inconclusive, questionable, or potentially unrepresentative of the true quality of the product or material.

Common scenarios

Borderline or out-of-spec results

Borderline or out-of-spec results is when test results are close to the acceptance limits or specification tolerances.

A re-test helps confirm whether the failure was due to measurement variation, operator error, or genuine nonconformance.

Suspected measurement or handling error

A suspected measurement or handling error occurs if there is evidence the first inspection may have incorrectly performed (e.g., instrument malfunction, incorrect calibration, sample contamination, mislabeling, or human error).

A re-test ensures the result reflects the true condition of the lot or item.

Sample damage or anomaly

A sample damage or anomaly occurs if the tested sample was found defective for reasons unrelated to product quality (e.g., broken during preparation or mishandled).

A new sample from the same lot may be re-tested to ensure fairness.

Verification for critical characteristics

A verification for critical characteristics is for high-risk or regulated industries (e.g., pharmaceutical, aerospace, and food safety).

A re-test may be mandated by policy when key product characteristics fail; the re-test provides additional evidence before rejecting or releasing a batch.

Customer or regulatory request

A customer or regulatory request is if a customer disputes results or a regulatory body requires additional verification.

Re-tests may be performed to confirm compliance.

Process variability checks

Sometimes re-tests are performed on a second sample to verify whether the variation is consistent across the batch or isolated to the first sample.

Create a re-test

You can create a re-test automatically (with Business Central workflows) or manually. The following steps guide you through a scenario of creating a re-test using an existing test.

Goal

Ad-hoc inspections from the template are useful for demos and training; however you are more likely to use the Create Test action available in several spots or to automate test creation. Supervisors can sometimes use this to create or re-create tests, but this action is rarely a main flow.

Prerequisite

  • Ensure the Assisted Setup Wizard was run.
  • Have a quality inspection test template.
  • Have a quality inspection test generation rule.

Steps

  1. Navigate to Quality Inspection Templates in Business Central.
  2. Select a Quality Inspection Template with a rule associated to it.
  3. Select Create Test.
  4. Select the button for the Source field if it is blank, and select an appropriate source (e.g., a purchase line).
  5. Select the  button on the Choose Record field, select an appropriate record, and Select OK.
  6. Select OK on Create Quality Inspection (creates a Quality Inspection test with the selected record’s values).
  7. Input the pass values and select Finish.
  8. Select Create Re-Test.

A new test document appears with the same document number, item, and lot, but the test values are blank and the re-test number on the document is incremented by 1.

View this article as Markdown

Still need help?

Ask other Business Central users in the Insight Works community, or send the details to the support team. Include the steps you took and any error message you saw.