Skip to content

Quality Inspector · How-to guides

How Quality Inspector Support ISO 55001

Last updated September 14, 2026

What is ISO 55001?

ISO 55001 is the international requirements standard for asset management systems. It helps organizations manage assets throughout their lifecycle while balancing performance, risk, cost, and organizational objectives.

ISO 55001 covers more than equipment maintenance. It also addresses leadership, planning, decision-making, risk management, lifecycle management, performance evaluation, and continual improvement.

Public ISO information on the ISO 55001:2024 standard : https://www.iso.org/standard/83054.html

ISO/TC 251 overview of the 2024 changes: https://committee.iso.org/sites/tc251/home/projects/published/iso-55001.html

Does Quality Inspector support ISO 55001?

Yes. Quality Inspector can support specific ISO 55001 requirements by providing inspection records, condition measurements, failure analysis, inspection-tool controls, photographs, attachments, and nonconformance records.  Basic tool calibration data is also available.

However, Quality Inspector is not a complete asset management system. Maintenance Manager is the Insight Works application with the strongest direct relationship to ISO 55001 and can be used for asset maintenance.

Organizations can combine Maintenance Manager with Quality Inspector, MxAPS, DocXtender, and Microsoft Dynamics 365 Business Central (using Business Central’s fixed asset support and production orders for scheduling maintenance) to support different parts of the asset lifecycle and produce objective evidence for an ISO 55001 audit.

Applications that can support ISO 55001

Maintenance Manager

Maintenance Manager supports equipment records, preventive and corrective maintenance, work orders, parts, instructions, maintenance schedules, resource planning, and maintenance history.

https://dmsiworks.com/apps/maintenance-manager

Quality Inspector

Quality Inspector supports asset-condition inspections, recorded measurements, inspection tools, photographs, failure analysis, and nonconformance records.  Tool calibrations and basic tool inventory can be maintained and recorded, however applications like Maintenance Manager should be considered for a full asset maintenance system.

https://dmsiworks.com/apps/quality-inspector

MxAPS

MxAPS can coordinate maintenance orders with production schedules and available capacity. This helps organizations plan maintenance while considering production requirements and resource availability.   This may not be necessary for most asset management scenarios, however if you have more complex scheduling criteria for your assets then MxAPS can simplify the scheduling.

https://dmsiworks.com/apps/mxaps

DocXtender

DocXtender can make manuals, drawings, certificates, procedures, photographs, and other documents available from related Business Central records.

https://dmsiworks.com/apps/docxtender

Microsoft Dynamics 365 Business Central

Business Central Fixed Assets supports asset identification, acquisition, depreciation, maintenance costs, revaluation, impairment, and disposal records.

https://learn.microsoft.com/en-us/dynamics365/business-central/fa-manage

How Insight Works applications support ISO 55001

4.5: Asset management decision-making and value

Maintenance Manager provides equipment and maintenance history that can support decisions about maintenance frequency, equipment reliability, repair, replacement, and asset life.

Quality Inspector adds condition measurements, inspection results, and failure trends. Business Central provides financial records such as asset value, depreciation, maintenance expenses, and disposal information.

Together, these records help an organization compare asset performance, risk, and cost when making decisions.

The applications provide supporting information, but the organization must define its own decision-making criteria and methods for determining asset value.

Related information:

Manage equipment and assets in Maintenance Manager:

https://kb.dmsiworks.com/knowledge-base/manage-equipment-and-assets-in-maintenance-manager/

Manage fixed assets in Business Central:

https://learn.microsoft.com/en-us/dynamics365/business-central/fa-manage

6.1.2 and 6.1.3: Actions to address risks and opportunities

Maintenance Manager can identify maintenance that is due and schedule recurring activities based on time, runtime, output quantity, or distance. Corrective maintenance requests can be assigned priorities based on the urgency of the equipment problem.

Quality Inspector can record equipment-condition checks, tool usage, tool calibration data, measurements, inspection failures, photographs, and recurring failure information.  Inspections can also be configured to be performed on tools.

These records can help an organization:

  • Identify equipment requiring attention
  • Increase maintenance or inspection frequency
  • Prioritize work on critical equipment
  • Investigate recurring failures
  • Identify opportunities to improve asset performance

The applications do not replace the organization’s asset risk register, asset criticality assessment, or risk management process.

6.2.1: Strategic Asset Management Plan

ISO 55001 requires a Strategic Asset Management Plan, commonly called a SAMP. Insight Works applications do not create or manage a formal SAMP however Maintenance Manager and Quality Inspector can provide maintenance history, condition information, schedules, resource requirements, and performance data used to develop or review the plan.

6.2.2 and 6.2.3: Asset management objectives and planning

Maintenance Manager helps translate asset management plans into operational activities through:

  • Preventive and corrective maintenance tasks
  • Maintenance schedules and intervals
  • Priorities and effective dates
  • Required parts and resources
  • Maintenance instructions
  • Maintenance orders
  • Work completion records

These records can demonstrate that planned asset activities were assigned, scheduled, performed, and recorded.

The organization must still define its asset management objectives, assign responsibilities, provide resources, and evaluate whether those objectives were achieved.

Related information:

Create and manage tasks in Maintenance Manager:

https://kb.dmsiworks.com/knowledge-base/create-and-manage-tasks-in-maintenance-manager/

Generate, execute, and manage maintenance orders:

https://kb.dmsiworks.com/knowledge-base/generate-execute-and-manage-maintenance-orders/

7.1: Resources

Maintenance Manager can identify the labor, routing steps, replacement parts, instructions, and other resources needed to complete maintenance work.

MxAPS can coordinate maintenance orders with production schedules so that required maintenance is planned alongside production capacity.

The organization remains responsible for determining whether its people, budget, tools, parts, and contractors are sufficient to meet its asset management objectives.

When quality checks are recorded with Quality Inspector the operator that recorded the checks, and the recorded tool usage, is available for review.

7.5: Documented information

Maintenance Manager records:

  • Equipment information
  • Maintenance tasks
  • Maintenance orders
  • Instructions
  • Parts consumption
  • Work status
  • Completed maintenance history
  • Attached manuals and schematics

Quality Inspector adds completed inspection results, measurements, photographs, attachments, failure records, tools, and nonconformance reports.

Business Central’s change log can provide additional information about who changed selected records and when. The organization must configure the appropriate tables and fields for change logging.

Related information:

Daily management tasks and historical data in Maintenance Manager:

https://kb.dmsiworks.com/knowledge-base/daily-management-tasks-and-historical-data-in-maintenance-manager/

Add attachments to Quality Inspector test plans and tests:

https://kb.dmsiworks.com/knowledge-base/add-attachments-to-test-plans-and-tests-in-quality-inspector/

Audit changes using the Business Central change log:

https://learn.microsoft.com/en-us/dynamics365/business-central/across-log-changes

7.6: Data and information

Maintenance Manager can maintain information such as:

  • Equipment and fixed asset relationships
  • Serial numbers
  • Activation dates
  • Work center and machine center assignments
  • Maintenance intervals
  • Maintenance due status
  • Maintenance orders
  • Parts consumption
  • Completed maintenance history

Quality Inspector can add actual test values, condition measurements, inspection results, attachments, photographs, and failure analysis.

These records provide traceability between an asset and the work or inspections performed on it.

The organization must still define its data ownership, validation, retention, security, and governance requirements.

7.7: Knowledge

Maintenance Manager can make maintenance instructions, manuals, schematics, and safety information available to technicians while they perform work.

Quality Inspector work instructions can guide inspectors through required checks, measurement methods, and acceptance criteria.

Configure work instructions in Quality Inspector:

https://kb.dmsiworks.com/knowledge-base/configure-work-instructions-in-quality-inspector/

These features support access to operational knowledge. They do not replace employee training, competence assessments, or formal knowledge-management procedures.

8.1: Operational planning and control, including lifecycle management

This is the strongest area of ISO 55001 support. Business Central Fixed Assets can maintain financial records for asset acquisition, depreciation, maintenance expenses, revaluation, impairment, and disposal.

Maintenance Manager supports equipment tracking, preventive maintenance, corrective maintenance, parts, work orders, instructions, and historical records.

Quality Inspector supports condition and performance verification through repeatable inspections and recorded measurements, as well as tool usage information.

MxAPS can coordinate planned maintenance with production schedules.

Together, the applications can support several asset lifecycle stages:

Acquisition and commissioning

  • Business Central fixed asset records
  • Maintenance equipment records
  • Serial numbers
  • Activation dates

Operation

  • Equipment assignments
  • Production integration
  • Asset-condition inspections

Maintenance

  • Preventive and corrective tasks
  • Maintenance orders
  • Resources and parts
  • Work instructions
  • Completion records

Performance review

  • Maintenance history
  • Inspection trends
  • Failure analysis
  • Maintenance costs

Disposal

  • Business Central fixed asset disposal records

The organization remains responsible for broader lifecycle decisions such as asset design, investment approval, replacement strategy, and disposal criteria.

8.2: Control of change

Maintenance orders, revised maintenance intervals, task instructions, and attached documents can provide records of changes to asset maintenance activities.

Business Central workflows and change logging can add approvals and traceability when configured.

Maintenance Manager is not a dedicated management-of-change system. The organization must define how asset changes are evaluated for risk, cost, safety, resources, documentation, and operational impact.

8.3: Externally provided processes, products, technologies, and services

Quality Inspector can support verification of externally supplied parts through receiving inspections, vendor-specific inspection rules, Certificate of Analysis checks, attachments, and recorded results.

Maintenance Manager can document parts and resources used during maintenance. Business Central purchasing and vendor records provide the related purchasing history.

These records can demonstrate that externally supplied products were checked.

The organization must still define supplier requirements, contractor controls, service-level requirements, and supplier performance evaluations.

9.1: Monitoring, measurement, analysis, and evaluation

Maintenance Manager provides information about:

  • Maintenance that is due
  • Pending and completed maintenance orders
  • Equipment maintenance history
  • Parts and resource usage
  • Maintenance activities

Quality Inspector provides:

  • Actual measurements
  • Inspection history
  • Inspection results
  • Failure information
  • Trend analysis

Business Central provides maintenance costs and other financial asset information.

These records can support the evaluation of:

  • Planned maintenance completion
  • Recurring equipment failures
  • Asset-condition trends
  • Maintenance costs
  • Resource and parts usage
  • Effectiveness of changed maintenance intervals

Related information:

Use the Quality Inspector failure analysis tool:

https://kb.dmsiworks.com/knowledge-base/using-the-quality-inspector-failure-analysis-tool/

Fixed asset analytics in Business Central:

https://learn.microsoft.com/en-us/dynamics365/business-central/fa-analytics-overview

10.1: Continual improvement

Maintenance history, inspection trends, parts consumption, costs, and failure analysis can identify opportunities to improve asset management.

An organization may use these records to:

  • Revise maintenance intervals
  • Improve maintenance instructions
  • Change required parts
  • Add inspections after maintenance
  • Reallocate maintenance resources
  • Recommend asset repair or replacement

Updated maintenance tasks, inspection plans, and work instructions can provide evidence that operating experience was used to improve future work.

10.2: Nonconformity and corrective action

Maintenance Manager supports corrective maintenance requests and orders when equipment problems are identified.

A corrective maintenance request can identify the affected equipment, describe the problem, and assign a priority. The resulting maintenance order documents the corrective work and its completion.

Quality Inspector provides a more formal nonconformance process. A Non-Conformance Report can document the failure, investigation, root cause, disposition, and corrective action. A subsequent inspection or retest can verify whether the required condition or performance was restored.

Related information:

Non-Conformance Reports in Quality Inspector:

https://kb.dmsiworks.com/knowledge-base/non-conformance-reports-ncrs-in-quality-inspector-7-26/

Create and manage corrective maintenance tasks:

https://kb.dmsiworks.com/knowledge-base/create-and-manage-tasks-in-maintenance-manager/

An equipment failure is not automatically a nonconformity of the asset management system. The organization must determine whether the failure also represents a failure to follow its approved asset management processes.

10.3: Predictive action

ISO 55001:2024 introduces an explicit requirement for predictive action. Maintenance Manager can schedule activities based on time, runtime, output quantity, and distance. Quality Inspector can provide condition measurements and failure trends that help identify equipment deterioration.

Historical maintenance and cost information can also help identify assets that may require intervention.

These capabilities provide data for predictive decisions. They do not provide sensor-based condition monitoring, remaining-useful-life calculations, or an automated predictive maintenance model.

The organization must define how it will identify future changes, risks, opportunities, and asset-condition trends and determine when predictive action is required.

What is not included (process)

Insight Works applications support operational controls and records, but they do not provide every component required by ISO 55001, there are process and organizational requirements.  Specifically, the organization must separately establish and maintain:

  • Organizational context and interested-party requirements
  • Asset management policy
  • Leadership responsibilities
  • Asset management system scope
  • Strategic Asset Management Plan
  • Asset management objectives
  • Decision-making and value criteria
  • Asset criticality and risk methodology
  • Employee competence and awareness
  • Communication plans
  • Internal audits
  • Management reviews
  • Formal management-of-change processes
  • Supplier and contractor governance
  • Capital investment and asset portfolio planning

Does using these applications make an organization ISO 55001 certified?

ISO certification is performed by an independent certification body. Maintenance Manager, Quality Inspector, MxAPS, DocXtender, and Business Central can help an organization produce the controlled records and objective evidence needed to support an asset management system and certification audit.

The organization must configure the applications to match its approved processes and demonstrate that those processes are consistently followed and effective.

View this article as Markdown

Still need help?

Ask other Business Central users in the Insight Works community, or send the details to the support team. Include the steps you took and any error message you saw.