The goal of this article is to help answer the question “How Do I Send Items That Need Purchase Order Inspection to an Inspection Bin When They Are Received?”. If some purchased items need to be inspected before they can be put into normal inventory, Quality Inspector can create a Quality Inspection Test when the items are received and have the resulting Warehouse Put-away direct the inspection quantity to an inspection bin.
For example, you may have certain items that always require a purchase order inspection. When receiving those items, you want them to go to an inspection or QC Hold bin instead of being put away directly into their normal storage bin.
You may also have many items that follow the same inspection process and want to identify them by an Item Category or other common criteria instead of creating a separate inspection rule for every item.
Using this feature in this example configurations requires that you’re using lot/serial/package warehouse tracking, as the lot/serial/package is used to help determine what quantity is used for the test amount should splits be required on the put-away lines. If you’re testing this feature in the CRONUS White Location use the CRONUS example item 80216-T as it will have the CRONUS lot tracking code of “LOTALL”.
This example walkthrough shows one way to configure that process using:
- A Business Central location that uses Warehouse Receipts and Warehouse Put-aways
- Item tracking
- A Quality Inspector Test Generation Rule
- Quality Inspector’s Put Away to Inspection Bin functionality
The standard Business Central WHITE location is an example of a location configured for advanced warehouse processing with Warehouse Receipts and Warehouse Put-aways.
You can also use Quality Inspection Grades to limit the inventory from accidentally being used in production while the quantity is being tested, this will help prevent accidental movements from quality control bins into other bins to prevent accidental consumption in production.
Other Business Central warehouse configurations are possible. The exact setup you use will depend on how your locations, bins, item tracking, and receiving processes are configured.
The process demonstrated in this article is:
Purchase Order → Warehouse Receipt → Quality Inspection Test → Warehouse Put-away → Inspection Bin
For items that do not require inspection, Business Central continues to use its normal put-away process.
For items that do require inspection, Quality Inspector changes the applicable Place line on the generated Warehouse Put-away so warehouse personnel are instructed to place that quantity into the inspection bin.
For more information about inspection-bin routing, see:
Route Put-aways to Inspection Bins in Quality Inspector for QC Hold Locations
Example Scenario
Suppose your purchasing team identifies certain items as requiring inspection when they are received.
You want the following to happen:
- A user receives the Purchase Order using a Warehouse Receipt.
- Quality Inspector recognizes that the item requires a purchase order inspection.
- A Quality Inspection Test is created.
- Business Central creates the Warehouse Put-away.
- The Warehouse Put-away tells the warehouse user to place the inspection quantity into the inspection bin instead of the normal storage bin.
You do not want the receiving user to have to remember which items require inspection or manually reclassify the inventory after receiving it.
You may also have dozens or hundreds of items that require the same inspection. In that case, the Test Generation Rule can use common item criteria, such as an Item Category Code, rather than requiring a separate rule for every Item No.
Example Warehouse Configuration
This walkthrough uses a location configured similarly to Business Central’s standard WHITE location. Other location configurations are possible however this specific article will focus on a directed pick and put location.
The location uses:
- Warehouse Receipts
- Warehouse Put-aways
- Bins
- Item tracking
The location also has:
- Require Receive enabled
- Require Put-away enabled
Quality Inspector Assisted Setup should already be completed.
The item must use supported item tracking, such as:
- Lot tracking
- Serial tracking
- Package tracking, where supported
The exact zones and bin codes used for receiving, inspection, and normal storage will depend on your Business Central warehouse configuration.
For information about Business Central warehouse setup, see:
Microsoft: Design Details: Warehouse Setup
Microsoft: Set Up Items and Locations for Directed Put-away and Pick
1. Create the Purchase Order Inspection Template
Create or select the Quality Inspection Template that defines the inspection that should be performed when the purchased material is received.
The template contains the inspection fields, measurements, questions, and acceptance criteria that need to be recorded.
The Quality Inspection Template defines “What needs to be inspected?”
The Test Generation Rule configured later defines: “When should the inspection be created, and which items should it apply to?”
For more information: Understand Quality Inspection Templates and Test Generation Rules
2. Decide Which Purchased Items Need Inspection
You do not need to create a separate Test Generation Rule for every item that requires the same purchase order inspection.
For example, your organization may use an Item Category Code to identify items that require incoming inspection.
The Test Generation Rule can then select items using that Item Category Code.
This makes it possible for purchasing or inventory staff to identify whether an item requires inspection through the Item Card rather than requiring someone to maintain a separate Quality Inspector rule for every Item No.
The test generation rules do not define the Inspection Bin Rules, they define which Quality Inspection Template should be used for certain items.
The inspection bin configuration, configured later in this article, will determine which bin which items need to be routed to.
Note: If you want to configure Inspection Bins in bulk, then navigate to “Inspection Bins” from the search bar.
For more information:
Create a Test Generation Rule for a Category of Items in Quality Inspector
3. Tell Quality Inspector Which Bin to Use for Inspection
For an item that should be routed to inspection:
- Open the Item Card for the item you want to configure.
- Go to the “Quality Inspection” group
- Either:
- Enable Put Away to Inspection Bin.
- If you don’t yet have inspection bins then when clicking on “Put Away to Inspection Bin” you will be prompted with “No inspection bin configuration exists for this item. Would you like to set up the inspection bins now?”, choose “yes”.
- Or, alternatively choose Related > Warehouse > Inspection Bins.
- Enable Put Away to Inspection Bin.
- Add the inspection-bin configuration for the applicable location you will need to enter:
- Location (the from location, in our example we’re using the “WHITE” Cronus location)
- From Zone ( in our Cronus example with the WHITE Cronus location we’re using RECEIVE ).
- Quality Control Zone (this is the target zone in the white location, in our Cronus example we’re using QC zone).
- Quality Control Bin (this is the target bin that determines where we route to, in the standard CRONUS WHITE location in the QC zone we’ll use W-10-0002).
Configure the applicable:
- Location Code
- From Zone Code, when required
- Quality Inspection Zone
- Quality Inspection Bin
The inspection bin is the physical warehouse bin where inventory should be placed while it is waiting to be inspected.
The normal receiving and warehouse setup does not need to be replaced by the inspection bin. Quality Inspector uses the Inspection Bin configuration when it determines that a received item has a qualifying inspection.
For more information:
Route Put-aways to Inspection Bins in Quality Inspector for QC Hold Locations
4. Create the Test Generation Rule
Create a Test Generation Rule for the purchase order quality inspection template.
For the Warehouse Receipt process used in this example we’ll use this configuration:
Source Table: Warehouse Receipt Line
Warehouse Receive Trigger: “When Whse. Receipt is Created”
Then configure the Item Filter that identifies the items requiring inspection.
For example, the Item Filter could select a particular Item Category Code.
The purpose of the rule is: When this type of item has a warehouse receipt created for it, create this Quality Inspection Test.
Avoid adding filters that are not required to determine whether the item should be inspected.
For example, the destination inspection bin does not need to be part of the Test Generation Rule. The Test Generation Rule determines whether an inspection is required; the Inspection Bin setup determines where the inspection quantity should be placed.
5. Receive the Purchase Order
Create the Warehouse Receipt using the normal Business Central process. With the test generation rule configured for “When Whse. Receipt is Created” from the previous steps this should automatically create the Quality Inspection Test when the warehouse receipt is created.
Enter the required item tracking information while the item is still on the purchase order, such as:
- Lot No.
- Serial No.
- Expiration Date, when applicable
Then create the warehouse receipt (which should then create the Quality Inspection Test), then post the Warehouse Receipt.
If your Quality Inspection Test is created before the lot is known, just make sure to define the lot number on the Warehouse Receipt and also the Quality Inspection Test prior to creating the Warehouse Put-away.
Business Central then creates the Warehouse Put-away.
Quality Inspector uses the inspection and Inspection Bin setup to change the applicable Warehouse Put-away Place line so the quantity requiring inspection is directed to the inspection bin.
6. Review the Warehouse Put-away
Open the Warehouse Put-away created from the posted Warehouse Receipt.
For inventory requiring inspection, review the Place lines.
The inspection quantity should be directed to the configured Quality Inspection Bin.
Inventory that does not require inspection continues through the normal Business Central put-away process.
The warehouse employee can then register the Warehouse Put-away normally.
The important result is that the Warehouse Put-away itself tells the warehouse user where the inspection material should go.
The user does not need to receive the item into normal inventory first and then perform a separate Item Reclassification merely to get it into the inspection area.
What Happens If the Entire Receipt Needs Inspection?
If the inspection applies to the entire received quantity, Quality Inspector directs the entire applicable put-away quantity to the inspection bin.
For example:
Received quantity: 100
Inspection quantity: 100
The Warehouse Put-away directs all 100 to the inspection bin.
What Happens If Only a Sample Needs Inspection?
If only a sample of the receipt needs to be physically inspected, Quality Inspector can split the Warehouse Put-away.
For example:
Received quantity: 100
Inspection sample quantity: 5
The resulting put-away can direct:
5 → Inspection Bin
95 → Normal storage bin
This allows the sample quantity to be physically separated for inspection while the remaining inventory follows the normal warehouse put-away process.
Why Is the Test Created When the Warehouse Receipt Is Posted?
Quality Inspector needs the Quality Inspection Test before the Warehouse Put-away is created.
The test provides information Quality Inspector uses when deciding how the put-away should be changed, including:
- Which tracked inventory is being inspected
- The inspection quantity
- Whether the full quantity or only a sample needs to be placed into inspection
For the Warehouse Receipt process used in this walkthrough, this is why the Test Generation Rule uses:
Warehouse Receipt Line
and:
When Whse. Receipt is posted
Do I Need to Move the Inventory to the Inspection Bin After Receiving It?
Not for the initial receiving process described in this article.
The goal is not simply to move inventory into an inspection bin after it has already been received and put away.
The goal is for the Warehouse Put-away to tell the warehouse user to put the inspection quantity into the inspection bin in the first place.
Using Put Away to Inspection Bin allows Quality Inspector to modify the generated Warehouse Put-away instead of relying on a separate inventory reclassification afterward.
What Happens After the Inspection?
After the item has been placed into the inspection bin, complete the Quality Inspection Test.
What happens next depends on your organization’s quality process.
For example:
Passed inventory can be moved to its normal warehouse storage location.
Failed inventory can remain in a QC Hold or quarantine area until its disposition is determined.
Pending inventory can remain in the inspection area until the required review or approval is complete.
For an example of a broader QC Hold and Certificate of Analysis process, see:
Manage COA-Required Purchase Receipts with Quality Inspector
Why Didn’t My Item Go to the Inspection Bin?
If the Warehouse Put-away still directs the item to its normal storage bin, check the following:
- Is Put Away to Inspection Bin enabled on the Item Card?
- Is an Inspection Bin configured for the item and location?
- Is the correct Quality Inspection Zone and Quality Inspection Bin configured?
- Does the item have the required lot, serial, or package tracking?
- Was a Quality Inspection Test actually created for the receipt?
- Does the test correspond to the same item and tracking information being put away?
- Does the Test Generation Rule use Warehouse Receipt Line?
- Is the Warehouse Trigger When Whse. Receipt is posted?
- Does the item match the Item Filter used by the Test Generation Rule?
Inspection-bin routing requires a qualifying Quality Inspection Test and an applicable Inspection Bin configuration.
Related Articles
Route Put-aways to Inspection Bins in Quality Inspector for QC Hold Locations
Manage COA-Required Purchase Receipts with Quality Inspector
Create a Test Generation Rule for a Category of Items in Quality Inspector
Understand Quality Inspection Templates and Test Generation Rules
Create a Test Automatically with a Put-Away or Movement into a Bin in Quality Inspector
Microsoft: Design Details: Warehouse Setup
Microsoft: Set Up Items and Locations for Directed Put-away and Pick
Still need help?
Ask other Business Central users in the Insight Works community, or send the details to the support team. Include the steps you took and any error message you saw.