Skip to content

Quality Inspector · How-to guides

How Quality Inspector Supports ISO 9001:2015

Last updated September 10, 2026

Quality Inspector from Insight Works for Microsoft Dynamics 365 Business Central can help organizations collect, control, retain, and analyze quality records that may be used as objective evidence when implementing or auditing a quality management system based on ISO 9001:2015.

Quality Inspector being installed does not certify an organization as ISO 9001 compliant. Certification applies to the organization’s complete quality management system, including its leadership, policies, objectives, risks, processes, employee competence, internal audits, management reviews, corrective actions, and evidence that those processes are consistently followed.

ISO describes ISO 9001 as a quality management system standard for organizations of any size. It is based on quality management principles that include customer focus, leadership, engagement of people, a process approach, improvement, evidence-based decision-making, and relationship management.

Quality Inspector from Insight Works and standard Business Central functionality can support many of the operational controls and records commonly reviewed during an ISO 9001 audit.

ISO 9001:2015 Clause Support

ISO 9001:2015 clause How Quality Inspector and Business Central can help Related documentation
7.1.5 – Monitoring and measuring resources (measurement tools) Quality Inspector Tools can identify the measuring equipment used for an inspection and record its identification number, calibration date, calibration interval, next calibration date, certificate number, and calibration details. Depending on configuration, Quality Inspector can prevent use of an expired tool or prevent measurements from being entered with it. When tool usage is recorded, the tool’s Where-Used Tests history identifies the specific inspections on which it was used. The inspection retains the related item, lot or serial number, measurement, user, and date/time information. Finished tests cannot be changed through the normal Quality Inspection Test page, and the Business Central change log can be enabled for additional monitoring of selected records. Together, these controls provide a traceable evidence chain between the measuring instrument and the inspected material while preventing routine retroactive changes. Use Tools in Quality Inspector Use Quality Inspection Tests Audit Changes in Business Central
7.5.1 and 7.5.2 – Documented information and creating or updating records Quality Inspection Templates define the questions, measurements, acceptable values, pass conditions, and instructions that inspectors must follow. Completed Quality Inspection Tests retain the actual results and related source information. Documents, notes, images, signatures, and generated PDF reports can be attached to provide supporting evidence. Understand Quality Inspection Templates and Test Generation Rules Add Attachments to Inspection Test Plans and Quality Inspection Tests Recording Notes in Quality Inspector
7.5.3 – Control of documented information Quality Inspection Tests and their measurements retain created and modified date, time, and user information. Finished tests are no longer editable through the normal Quality Inspection Test page. Business Central permissions control access, while the change log can record who changed selected data, when it was changed, and the old and new values. Organizations remain responsible for defining suitable permissions, retention periods, backup processes, and change-log configuration. Quality Inspection Test Values Quality Inspector Permissions Audit Changes in Business Central
8.4.2 – Type and extent of control over externally provided products and services Quality Inspector can create incoming inspections from purchase and warehouse receiving processes. Test Generation Rules can assign different inspection templates according to vendor, item, item category, or other source conditions. Sampling can use fixed quantities, percentages, AQL plans, multiple samples, or skip-lot rules. The resulting records provide evidence of the inspection controls applied to externally supplied material and can support decisions to increase or reduce inspection based on supplier performance and risk. Create Quality Inspections for Receipts Create a Test Based on a Vendor Sampling and Skip Lot in Quality Inspector
8.4.3 – Information for external providers Vendor-specific inspection templates and receiving rules can document the characteristics and acceptance criteria expected from supplied material. Quality Inspector can also support a receiving process that requires a supplier Certificate of Analysis before material is accepted. Business Central purchase documents and attachments can be used to communicate applicable specifications and purchasing requirements to the supplier. Quality Inspector records verification of those requirements, but the organization remains responsible for communicating them to the external provider. Create a Test Based on a Vendor Manage COA-Required Purchase Receipts with Quality Inspector Look Up Specifications from Another Table
8.5.1 – Control of production and service provision Quality Inspector can create inspections at defined production stages and require specified checks before production continues. Test Generation Rules determine when an inspection is created and which template applies. Field-level work instructions explain how individual measurements or observations are to be completed. These controls provide evidence that production inspections were performed under defined conditions. Create a Test Automatically on Production Output Use Field-Level Work Instructions in Quality Inspector Require a Quality Inspection Before the Next Operation
8.5.2 – Identification and traceability Quality Inspection Tests can retain source information such as the item, lot number, serial number, package number, document number, vendor, production order, work center, and quantity. Standard Business Central item tracking can trace lot- and serial-tracked material through purchasing, inventory, production, transfers, and sales. An auditor can therefore follow an inspection result back to the inspected material and related Business Central transaction. Use Quality Inspection Tests Track Items with Serial, Lot, and Package Numbers Trace Item-Tracked Items
8.5.4 – Preservation Quality Inspector can use grades, lot restrictions, workflows, hold bins, quarantine locations, and automated inventory movements to segregate inspected material and prevent unintended use or shipment. Standard Business Central item tracking records expiration dates for applicable lot- or serial-tracked inventory. These controls can support preservation through identification, status control, segregation, shelf-life visibility, and controlled handling. Physical storage, packaging, contamination prevention, and environmental controls remain operational responsibilities outside Quality Inspector. Automate Block and Unblock Lot Transactions Route Put-Aways to Inspection Bins How to Place Part of a Lot on Hold Track Items with Serial, Lot, and Package Numbers
8.6 – Release of products and services Inspection grades and pass conditions determine whether recorded results meet defined requirements. Quality Inspector can prevent receipt, production output, inventory movement, or progression to the next operation until a required inspection is completed or passes. Signature fields and approval workflows can identify the people who performed and approved the inspection. The completed inspection, grade, approval records, and attached reports provide evidence supporting the release decision. Configure Grades Prevent Production Output Until an Inspection Passes Use Basic Signatures in Quality Inspector Create a Multi-Step Approval Workflow
8.7 – Control of nonconforming outputs Quality Inspector grades and workflows can restrict lot transactions, block lot information, move material to a hold or quarantine area, create a purchase return, initiate a retest, adjust inventory, or perform another configured disposition. The inspection and related workflow records provide evidence of how nonconforming material was identified, controlled, and dispositioned. Automate Block and Unblock Lot Transactions Sample Workflows for Failed Stock Create a Purchase Return Order from a Test
9.1.1 – Monitoring, measurement, analysis, and evaluation: General Inspection templates define what is measured and the applicable acceptance criteria. Test Generation Rules define when and where inspections are created. Completed tests retain the measurements, results, grade, source, inspector, and date/time information needed to demonstrate that planned monitoring and measurement occurred. Understand Quality Inspection Templates and Test Generation Rules Quality Inspection Test Generation Rules Quality Inspection Test Values
9.1.2 – Customer satisfaction Quality Inspector can record inspections associated with sales returns and can use NCR templates to document customer-related quality issues. These records may contribute to customer complaint and return analysis. Quality Inspector does not directly conduct customer-satisfaction surveys or replace the organization’s broader process for monitoring customer perceptions. Create Automatic Tests for Sales Returns Non-Conformance Reports in Quality Inspector
9.1.3 – Analysis and evaluation Quality Inspector provides test-value lists, result matrices, charts, and failure-analysis tools for evaluating historical results. Failure Analysis can group failed inspections by vendor, item, work center, item attribute, BOM component, day or shift, and measurement. These views can help evaluate supplier quality, product conformity, process performance, recurring defects, and improvement priorities. Data can also be exported to Excel or analyzed in Power BI. Quality Inspection Test Values Quality Inspection Test Results Matrix Using the Quality Inspector Failure Analysis Tool
10.2 – Nonconformity and corrective action Quality Inspector can create a separate NCR from a failed inspection. When automatic NCR creation is configured, finishing a failed inspection triggers a Business Central workflow that creates the NCR and carries forward the related inspection and source information. NCR templates can require the organization’s selected investigation, containment, cause, correction, corrective-action, responsibility, and verification information before the NCR is completed. A subsequent retest can be linked to the same source material to provide evidence that the affected product or process now meets its acceptance criteria. The organization remains responsible for evaluating whether the corrective action addressed the underlying cause and was effective beyond the individual retest. Non-Conformance Reports in Quality Inspector Create a Retest in Quality Inspector Attach Files to PDF Non-Conformance Reports
10.3 – Continual improvement Historical measurements, grades, NCRs, supplier results, and failure-analysis information can help organizations identify recurring problems and improvement opportunities. Comparing results over time can also provide evidence of whether process changes produced the intended improvement. Quality Inspector supplies the operational evidence, while the organization remains responsible for selecting, implementing, and reviewing improvement actions. Using the Quality Inspector Failure Analysis Tool Quality Inspection Chart Values

Additional Supporting Capabilities

Automated and consistent inspection creation

Test Generation Rules can automatically create the correct inspection at receiving, production output, assembly output, inventory movement, or another configured business event. This reduces dependence on an employee remembering to create an inspection manually and provides evidence that defined inspection rules were consistently applied.

For more information, see:

Objective evidence and supporting documents

Inspectors can record numerical measurements, choices, dates, text, notes, signatures, and images. Supporting specifications, work instructions, supplier certificates, photographs, and other evidence can be attached to a test or its template.

Quality Inspector can also automatically create and attach a PDF inspection report or Certificate of Analysis when an inspection is finished.

For more information, see:

Sampling inspections

Quality Inspector supports fixed-quantity, percentage-based, AQL, multiple-sample, and skip-lot inspection approaches. The organization is responsible for selecting, approving, and documenting a sampling method appropriate for its products, risks, contractual requirements, and quality system.

For more information, see:

What Quality Inspector Does Not Provide by Itself

Quality Inspector supports operational quality control and the retention of quality evidence.

Organizations must separately address requirements such as:

  • Clauses 4.1 through 4.4 concerning organizational context, interested parties, QMS scope, and the organization’s quality processes. Quality Inspector enables these to occur, but the processes are defined and implemented by the organization.
  • Clauses 5.1 through 5.3 concerning leadership, customer focus, quality policy, and organizational responsibilities. Quality Inspector enables this to occur.
  • Clauses 6.1 through 6.3 concerning risks and opportunities, quality objectives, and planned changes. Quality Inspector enables these to be achieved, but requires people to implement.
  • Clauses 7.2 and 7.3 concerning employee competence and awareness. Quality Inspector enables tracking this information, but employee competence and awareness are the responsibility of the organization implementing the tool.
  • Design and development controls under clause 8.3, when applicable. Quality Inspector enables the design and development of the controls however.
  • Customer communication and the organization’s complete process for monitoring customer perceptions.
  • The internal audit program required by clause 9.2. Quality Inspector and Business Central (such as the change log, system audit fields) together enable an audit program, but the audit program itself is the responsibility of the organization.
  • Management review required by clause 9.3.
  • Evaluation of the effectiveness of corrective actions. Quality Inspector provides the information to allow the evaluation of the effectiveness, but does not evaluate the effectiveness by itself.
  • Applicable legal, regulatory, contractual, and customer requirements.
  • Control of the organization’s complete collection of quality policies and procedures.

Business Central, Microsoft 365, Power BI, Power Automate, DocXtender, or other applications may help manage some of these processes. However, the organization remains responsible for defining its quality management system, configuring the software appropriately, following its procedures, retaining suitable evidence, and demonstrating effectiveness to its certification body.

ISO 9001 Certification

Certification is performed by an independent certification body. ISO develops and publishes standards but does not audit organizations or issue ISO 9001 certificates.

The certification body evaluates the organization’s complete quality management system. The presence of Quality Inspector or any other software application does not establish conformity on its own. Auditors will evaluate how the organization configured and used its processes, whether employees consistently followed them, and whether the retained records demonstrate effective control and continual improvement.

References

ISO

The complete ISO 9001:2015 standard is copyrighted and is not reproduced in this article. Organizations should obtain an authorized copy of the standard and confirm their interpretation with their quality professional or certification body.

Microsoft Dynamics 365 Business Central

Quality Inspector

View this article as Markdown

Still need help?

Ask other Business Central users in the Insight Works community, or send the details to the support team. Include the steps you took and any error message you saw.