A customer may need a separate inspection record containing only the measurements and acceptance criteria relevant to them. A Customer CoA creates that record while retaining links to the original laboratory inspection and customer specification.
Configure the customer CoA template
- Open the Customer Quality Specification in Draft.
- Select or create a template in CoA Template Code. Its Template Type must be Customer CoA.
- Select Synchronize CoA.
- Accept the prompts to add missing specification fields to the template. When conditions differ, choose whether to copy the specification condition to the CoA or the CoA condition to the specification.
- Open the template and review its fields, acceptable grade conditions, and Field Copy Behavior.
| Field Copy Behavior | Use |
|---|---|
| Copy | Copies the source inspection value and permits editing on the customer CoA. |
| Copy and Lock | Copies the value and prevents editing until it is unlocked by an authorized user. |
| Use Default Value | Uses the configured default value. |
| Blank | Does not request a source-value copy for that field. |
Use Copy and Lock for measurements that should remain consistent with the laboratory inspection.
Require manual review before selecting inventory
For a process that requires a completed CoA before normal lot selection:
- Set CoA Requirement to Required before using.
- Set CoA Creation to Create Manually.
- Set Qualification Behavior to Block.
- Publish the specification.
To prepare the CoA:
- Finish the source laboratory inspection.
- Open the lot lookup from the sales document, or select the result in the Customer Lot Qualification Worksheet.
- Select Create CoA. You can also select the empty Customer CoA Test No. and confirm creation.
- Open the customer CoA test and review its values and grade.
- Finish the test, then refresh the qualification results and select the lot.
A finished customer CoA with an acceptable grade produces Allowed – CoA. A non-acceptable grade produces CoA Failed. An unfinished CoA produces Insufficient Test Data unless an applicable authorized override determines the result.
Prepare CoAs automatically
For automatic preparation with a warning-based selection process, set CoA Creation to Create Automatically and Qualification Behavior to Display Warning, then publish the specification.
Selecting tracking without an existing customer CoA attempts to create the record from the finished source inspection. Automatic creation does not finish the test. The inspector must review and finish it.
With CoA Requirement set to Optional, finished source results can qualify inventory when no customer CoA exists. Once a matching customer CoA exists, its status and grade are used for qualification.
Handle locked values and source changes
To correct a copied and locked measurement, update the source inspection. When that inspection is finished again, you can accept the prompt to update a linked customer CoA that is still open.
For an authorized exception, the user needs Unlock field value permission and can use Unlock Field Value on the CoA. Normal test status and editing permissions still apply.
Related articles
- Use Quality Inspection Templates
- Use Quality Inspection Tests
- Enable Functionality Per Quality Inspector
- Automatically Create Customer CoA PDFs in Quality Inspector
- Create Customer-Specific Certificates of Analysis in Quality Inspector
- Configure Customer Qualification Warnings, Blocks, and Overrides
- How to Find Lots That Meet a Customer’s Quality Specifications in Quality Inspector
- Configure Customer Quality Specifications in Quality Inspector
Still need help?
Ask other Business Central users in the Insight Works community, or send the details to the support team. Include the steps you took and any error message you saw.