- This topic has 2 replies, 2 voices, and was last updated 1 year, 11 months ago by Sayyam A..
-
AuthorPosts
-
2 November 2024 at 5:54 am #8576SASayyam A.
Hi , I want the shop floor insight report which generates the production order label so that if user A scans the barcode then it should automatically starts the clock in for user A only but with current configuration it automatically starts the clock for all the users. I just want to clock in only the user who is scanning the production order.
I have tried each report but I am unable to achieve it, Is this is possible?
I am using following shop floor reports to generate the barcode for production orders.
Shop Floor Production Order
Shop Floor Production Order Label 4X6
Shop Floor Production Order Line Label 4X6Thanks in advance!
4 November 2024 at 9:26 am #10121TVTerri V.Insight WorksHello Sayyam,
The “Shop Floor Production Order Label report” and the “Shop Floor Production Order Line Label report” are reports used by the SF web client user to clock onto multiple production order routing lines at the same time.
Either for all visible operations (aka production order routing lines) of that production order, or all visible operations of that production order line.
For this to work, you need to also allow multiple open time card lines at the same time (tracking time on concurrent things on the same time card). This is controlled by a setting on the SF client configuration card, called “Time Entry Mode”. You need to set it to “Auto – same entry only”. Otherwise this setting should be set to “Auto” for most or all other SF employees.
I don’t believe you want to use these label reports you mention.
If you simply want to clock onto 1 released production order routing line, then you need to use the job card report for the concerned released production order. Don’t forget you will need to set the job card report to use our report otherwise you will not get any barcodes: https://kb.dmsiworks.com/knowledge-base/how-to-use-the-shop-floor-production-order-job-report-as-your-default-production-order-job-card-report/
Then when you print the job card report you will see 2 barcodes for each routing line (aka operation). The barcode on the left is for setup time while the one on the right is for run time.
It isn’t possible for a SF employee to scan a barcode and then it affects other time cards of other SF employees. The user of the SF web client can only interact with his/her Shop Floor time card and nothing else.
Thank you,
7 December 2024 at 1:23 am #10165SASayyam A.Hi Terri, Thanks for the explanation.
I will try it and will share the results with you.
-
AuthorPosts
- Sign in below to reply.