Skip to content

Warehouse Insight

Zebra TC78 Incorrect Quantity Scanning (Honeywell Works Fine)

Viewing 2 posts – 1 through 2 (of 2 total)
  • Author
    Posts
  • #8550
    Dani

    Any advice on how to fix this?

     

     

    I’m using a Zebra TC78 handheld scanner, but it’s not capturing the correct quantity when scanning barcodes. The same barcodes work fine with a Honeywell scanner. I’ve checked settings and updated the firmware, but the issue persists.

    #10052
    Terri V.
    Insight Works

    Hello Dani,

    This issue may stem from having the Keystroke Output section and Intent Output incorrectly configured.

    Within the DataWedge, ensure the Keystroke Output checkbox is cleared.

    Within the Intent Output section, ensure the Intent Output is enabled, Intent Action is Whibarcode, Intent Category is blank, and Intent Delivery is set to Broadcast Intent.

    I recommend emailing us at su*****@*******ks.com so we can take a closer look at your Device Configuration live. We have a dedicated installation team to help properly configure devices, feel free to reach out as needed.

    Thank you,

     

Viewing 2 posts – 1 through 2 (of 2 total)
  • Sign in below to reply.