- This topic has 2 replies, 2 voices, and was last updated 2 years ago by Sean R..
Viewing 3 posts – 1 through 3 (of 3 total)
-
AuthorPosts
-
21 October 2024 at 1:42 pm #8565SRSean R.
Hello,
I am working to trial out WMS Express in preparation for deciding whether to pursue the full paid version but I can’t seem to set the Zebra scanner up properly as it won’t accept the scan input. I have a Zebra TC52AX on Android version 11.
Does it require an enter key or a specific barcode to scan?
Thank you,
Sean
21 October 2024 at 2:15 pm #10088MAMichael A.Insight WorksHi Sean,
The scanner settings on the Zebra device will need to be updated in order to scan the barcodes with Warehouse Insight. The settings can be updated using the steps below:
- Scan and Install the Warehouse Insight application onto the Zebra device. This is to download the Warehouse Insight profile. (If the application is already installed, we can skip this step).
- Open <b>DataWedge</b>
- Select the <b>Warehouse Insight</b> profile.
- Select <b>Associated Apps</b>. If there is no icon next to the * entry, you will need to recreate this entry.
- Correct Entry:
- Incorrect Entry:
- To recreate the entry, do the following:
- Tap and hold the incorrect entry until you get the option to delete the entry and delete it.
- Click on the tree dots in the top right corner and select to add a new entry.
- Scroll down the list and select <b>com.insightworks.warehouseinsight </b>This list is alphabetized.
- Next, select the * entry (it is the first one on the list)
- Correct Entry:
- In the <b>Keystroke Output </b>section, clear the enabled checkbox.
- In the <b>Intent </b><b>Output </b>section. configure this section as follows:
- Intent Output: Enabled
- Intent Action: whibarcode
- Intent Category: Make sure this is blank
- Intent Delivery: Broadcast Intent
- Disable <b>Basic Data Formatting </b>and <b>Advance Data </b><b>Formatting</b>
- In the Warehouse Insight application, tap on Menu > Configure (default password is 1234) > Menu > Barcoding. Configure these settings as follows:
- Barcode Wedge: Android Intent
- Intent Action: whibarcode
- Intent Category: Make sure this is blank
- Intent Barcode String: com.symbol.datawedge.data_string
22 October 2024 at 6:32 am #10090SRSean R.Thank you very much! That was exactly what I needed.
Sean
-
AuthorPosts
Viewing 3 posts – 1 through 3 (of 3 total)
- Sign in below to reply.