Skip to content

Warehouse Insight

Warehouse Pick – Auto Handle Pick Placements not carrying Lot to place line

Viewing 4 posts – 1 through 4 (of 4 total)
  • Author
    Posts
  • #8694
    John G.

    These are my current settings in Warehouse Insight Device Configurations for all of my locations.
    Warehouse > Pick > Auto Handle Pick Placements = TRUE/YES

    During a warehouse pick, after quantity and lot number entry, the lot information is not carrying over to the Place line on the device. When we attempt to POST, we get an error stating: Error (v2.13.8924.2) Item No. ='(our item)’, Variant Code = “, Lot No. ='(our lot code)’, Serial No. “: The total base quantity to take (X) must be equal to the total base quantity to place (0). When we manually attempt to update the Lot information, we also get an error code stating: Error (v2.13.8924.2) Cannot modify the Place lines while auto handling is enabled.

    Checking the same pick in BC, we could see the Lot selected on the Take line, but the Place line Lot field was empty.

    Have there been any other reported issues with this process?

    #10340
    Terri V.
    Insight Works

    Hello John,

    With this configuration, to modify lines in the pick, go to the ≡ Menu→ Switch Take/Place so that you are in the Picking(Take) screen.

    If you are still having issues, please submit a support request to sup****@*******ks.com for further assistance.

    Thank you,

    #10341
    John G.

    Thank you Terri, I want to clarify that last statement I made in my original post.

    This occurs after we have used the menu option as you detailed above to switch to the Place line of the pick and we are attempting to update the Place information… When we manually attempt to update the Lot information, we also get an error code stating: Error (v2.13.8924.2) Cannot modify the Place lines while auto handling is enabled.

    So basically, when we fill out the Take information for Lot and Qty and try to POST, it’s not carrying over to the Place information as it should be based on the Auto Handle setting = YES.

    #10343
    Terri V.
    Insight Works

    Hello John,

    To enable the device to handle the pick, the “Qty. to Handle” field must be zero on the item tracking lines in Business Central.

    Thank you,

Viewing 4 posts – 1 through 4 (of 4 total)
  • Sign in below to reply.