Skip to content

Warehouse Insight

Warehouse Insight FactBoxes – edit fields presented

  • This topic has 6 replies, 2 voices, and was last updated 5 months ago by Michaylla B..
Viewing 7 posts – 1 through 7 (of 7 total)
  • Author
    Posts
  • #8953
    Jamie C.

    Would like to bring the Sales Order Shipment method Code field 27 to a FactBox for Pick process. Can fields be edited in this manner?

    #10820
    Michaylla B.
    Insight Works
    Hello, 
    By going to the Warehouse Insight Applications page in Business Central. Select the PICK_DOC application and then select “Configure” on the “Columns”. This should open the Warehouse Insight Device Columns page. From there you will want to add a new line and configure the following:

    Event ID: 20001
    Table No. : 5767
    Field Order: 240
    Field No. : -8
    Data Type: Text
    Column Order: 25
    Visibility: Hidden
    Column Visible: Check box “Yes”
    Column Capton: Shipment Method
    Use Field Caption: Yes
    Show Caption: Yes
    Override Field Name: Shipment Method
    Is Formula: Check box “Yes”
    Override Value: 36,27,WHERE (No.=FILTER(‘[Source No.]’))
    Editor: TextBox
    It is important that the following setting are configured and is written exactly as the above in the “Override Value” column: “36,27,WHERE (No.=FILTER(‘[Source No.]’))”. Just remove the quotation marks.
    Otherwise, save the changes on Business Central and leave the Device Configurations page. Then reload your configuration on your scanner to see this “Shipment Method” code in the bottom header during your picking process.
    Hope this information helps!
    Cheers!
    #10827
    Jamie C.

    Michaylla,

    Followed the instructions (great detail by the way!!) and on handheld can see where the data should show, but the Shipment Method is populating to the field. Client has also added FactBoxes and can see those as well, but no Comments are populating to the handheld fields.

    I’ve checked the Extension, shows Installed, and we’ve reviewed setups. Any thoughts on what to look for next? Thank you!

    #10831
    Michaylla B.
    Insight Works

    Hello,

    To make the “Shipment Method Code” visible from a Warehouse Shipment configure the following:


    Event ID: 20001
    Table No. : 5767
    Field Order: 240
    Field No. : 44
    Data Type: Text
    Column Order: 25
    Visibility: Hidden
    Column Visible: Check box “Yes”
    Column Capton: Shipment Method
    Use Field Caption: Yes
    Show Caption: Yes
    Override Field Name: Shipment Method
    Is Formula: Un-check box “No”
    Override Value: “Blank”
    Editor: TextBox
    This will add the “Shipment Method Code” from your Sales orders that are converted to Warehouse Shipments and then picked on the picking application to the bottom fact boxes of the page. I hope this information helps!
    Look forward to hearing from you!
    #10835
    Jamie C.

    That worked! Thanks a million!

    #10848
    Jamie C.

    Greetings!

    Is it possible to insert more than one field like this? Could the Shipping Agent be listed just below the Shipment Method if designated at the Sales Order and related Warehouse Shipment? Thank you.

    #10849
    Michaylla B.
    Insight Works
    Hello, 
    By going to the Warehouse Insight Applications page in Business Central. Select the PICK_DOC application and then select “Configure” on the “Columns”. This should open the Warehouse Insight Device Columns page. From there you will want to add a new line and configure the following:
    Event ID: 20001
    Table No. : 5767
    Field Order: 255
    Field No. : 42
    Data Type: Text
    Column Order: 35
    Visibility: Hidden
    Column Visible: Check box “Yes”
    Column Capton: Shipping Agent Code
    Use Field Caption: Yes
    Show Caption: Yes
    Override Field Name: Shipping Agent Code
    Editor: TextBox
    Is Formula: Check box “No”
    Override Value: *Blank*
    Then, save the changes on Business Central and leave the Device Configurations page. Then reload your configuration on your scanner to see this “Shipping Agent Code” in the bottom header during your picking process.
    Hope this information help!
    Cheers!
Viewing 7 posts – 1 through 7 (of 7 total)
  • Sign in below to reply.