Skip to content

Dynamic Ship

USPS Carrier Service issues

Viewing 4 posts – 1 through 4 (of 4 total)
  • Author
    Posts
  • #8495
    Matthew D.

    We suddenly started having this issue yesterday.

    After doing the GetLabel action, the rate worksheet comes up and we would typically see and select USPS First as it was the lowest rate.  When the label printed it would say “Ground Advantage”.

    Now, we do not see First as an option, however Ground Advantage does come up as the lowest option, but when we select it, we get this error:

    The selected shipping agent ‘USPS’ and/or service ‘GroundAdvantage’ are not configured for use as a carrier service.

    How can we remedy this?  I’m not sure if someone accidentally changed something or if this is a new change with USPS

    If I go into Dynamic Ship Carrier List and look at the services for USPS, Ground Advantage is not there (First is) and I am not sure how to add it, that is what values to enter.  (If this is the correct remedy)

    Any help is appreciated.

    Thank you!

    #9935
    Terri V.
    Insight Works

    Hello Matthew,

    To add USPS Ground Advantage you need to ensure that you follow the instructions in the following KB Article: Dynamic Ship Carrier Account Configuration – Insight Works Knowledge Base.
    All you need to do is open the Dynamic Ship Carrier page and then select “Carrier” in the ribbon and “Services”, then add the service using code GroundADV and service “GroundAdvantage” spelled exactly that way.
    Thank you,
    #9936
    Matthew D.

    Thank you!   That was what I needed.

    #9939
    Austin K.

    Thank you, for this post, I had the same issue, and the response form Terri worked perfectly!

Viewing 4 posts – 1 through 4 (of 4 total)
  • Sign in below to reply.