Skip to content

Dynamic Ship

UPC scanning on Dynamic Ship Package Worksheet

Viewing 3 posts – 1 through 3 (of 3 total)
  • Author
    Posts
  • #8538
    Mark B.

    I have watched several video demos of Dynamic Ship to try to scan UPC codes in the “Dynamic Ship Package Worksheet” but the videos only show scanning ITEM numbers, although they mention you can scan UPCs, I don’t see it in any videos, nor have I had any success in trying to get this to work on the Demo version of the software I am trying to test.  How do you enable scanning UPCs and not just Item Numbers?

    #10025
    Insight Works
    Insight Works

    The requirements for using GTIN or UPC codes are:

     

    1. You must have either:
      1. Item References set up for the GTIN/UPC codes to cross reference the barcode to the proper item.
      2. The GTIN on the Item Card filled in with the GTIN/UPC code for that item.
    2. You must have the Barcode Rule for Item Reference or GTIN enabled.

     

    Barcodes are evaluated using Barcode Rules, and a number of standard rules are included as examples with the product. You can open the “Insight Works Barcode Rules” page to ensure the appropriate rule is enabled, or to change the rules to match your requirements. See https://kb.dmsiworks.com/knowledge-base/barcode-rules/ for more information (scroll to the bottom of the page to the “Item Barcode Rules” section).
    If you continue to have questions, please contact your Business Central partner if you’re in trial mode, or if you have purchased Dynamic Ship, please contact our support team at su*****@*******ks.com.

     

    #10815
    Rebecca K.

    Have you got it worked out?  I was able to do it, if you still need help.

Viewing 3 posts – 1 through 3 (of 3 total)
  • Sign in below to reply.