Skip to content

Shop Floor Insight

Unwanted Automatic Filler Lines in Shopfloor

Viewing 2 posts – 1 through 2 (of 2 total)
  • Author
    Posts
  • #8721
    Richard B.

    Hello,

    Over the past couple of weeks, we’ve been receiving automatic filler lines every morning.

    We’ve been using Shopfloor for a few years now, and this issue has never occurred before.

    Could you please help me understand why these unwanted lines are appearing? We do not use them in our current setup.

    Thank you,

     

    #10397
    Terri V.
    Insight Works

    Hello Richard,

    The filler time is something that can disabled if you don’t wish this to be added to the time card lines when the time card is closed.

    To disable this, navigate to the Shop Floor Setup page, and look for the “Default Filler Activity code” field in the Activities section. Remove the value that is found in the field to disable this. Normally this is activity code 300, however you may have something different listed.

    Also, it is possible that it is disabled on the SF setup page, but enabled on the SF employee cards. This same field exists on the SF employee cards and anything listed in “Activities” will act as an override. I recommend you also verify the SF employee cards to ensure nothing is set there.

    For the record, the filler time will add any missing time in the TC lines in such a way that the total time in the time card lines matches the time on the time card header. For example, the user has a time card from 8AM to 5PM. This means the total time on the time card header is 9h. If the user only tracked time for a total of 5h in the time card lines, then you would see a filler time of 4h added to account for this ‘missing’ time.

    This is useful whenever customers wish to export time to payroll providers, or simply if they wish to quickly see how much time is not being accounted for.

    Automatic Filler Time Functionality

    Thank you,

Viewing 2 posts – 1 through 2 (of 2 total)
  • Sign in below to reply.