Skip to content

WMS Express

unable to connect to BC after initial setup of wms express

Viewing 5 posts – 1 through 5 (of 5 total)
  • Author
    Posts
  • #8403
    Jun W.

    Hi Support,

    I’m trying to install WMS Express on my business central standard testing tenant. I’ve completed the following:

    1 downloaded wms express and run the assisted setup with option Warehouse

    2 downloaded Memu and installed Android warehouse insight using the link from the installation report

    3 make sure the http flag for both iwork common and wms express is set to yes

     

    The issue is when I tried to log in BC by scanning the barcode on step 2, nothing happens. I tried to reinstall wms express and rerun the assisted setup, but issue persists.

    The virtual scanner is working.

    Your help is much appreciated

    Jun

     

     

    #9764
    Jun W.

    I tried to paste web service info to browser and log with my BC credentials, below error shows up

     

    {"error":{"code":"Authentication_InvalidCredentials","message":"Web service access key is no longer supported as authentication. Please use OAuth.  CorrelationId:  69ae5c5a-dded-41ae-b48e-4c34cfe436e7."}}
    #9765
    Michael A.
    Insight Works

    Hi Jun,

    Thanks for reaching out. Some of our applications require Azure consent to be granted. In Business Central, navigate to Microsoft Entra Applications (formerly known as Azure Active Directory Applications). If an entry for WMS Express doesn’t exist, you can use the following information to create it:

    • Client ID: {3a171073-4bea-41f2-af3b-0431195184f8}
    • Description: Warehouse Insight
    • State: Enabled
    • User Permission Sets: D365 BUS FULL ACCESS, IWORKS COMMON, WHI – ALL
      • Note: An Azure Administrator for the tenant will need to grant this consent. This can be done by selecting the “Grant Consent” action at the top of this page entry.

    Once consent has been granted. Let’s generate another installation report.

    • Select the desired configuration code.
    • Service Type: OData
    • Login Method: OAuth
    • Toggle off the use of Additional Insight Works users if they are not in use.
    • Select either print or preview and close.

    On the emulator, open the Warehouse Insight application, and navigate to the home screen (you’ll see Warehouse Insight titled at the top with either a blank screen, or scratchpad). Scan the Step 2 barcode from the installation report. If needed, you can also navigate to Menu > Configure (default password is 1234) > Menu > System. Here you can manually configure the application to your environment if needed. Note that if you are manually configuring the application, please ensure that the login method has been updated as well to OAuth. This can be done by selecting Menu > Configure > Menu > Logins. Once complete, select Menu > Close and sign in.

    If you are ever prompted for a configuration password, the default password is 1234

    For more information on installing the extension, I would recommend reviewing the following knowledge base article: https://kb.dmsiworks.com/knowledge-base/configuring-the-software/

    Please ensure that the user also has the following permission sets: 6. User Logins – Insight Works Knowledge Base (dmsiworks.com)

    #9766
    Jun W.

    Hi Michael,

    Appreciate your response. I’ll reach out to our IT to grant the permission and let you know how it works.

    Jun

    #9767
    Jun W.

    Hi Michael,

    I happens to find out that the issue might be caused by the way memu virtual scanner works. Previous I sizes the scanner slightly bigger than the barcode. But now this sometimes doesn’t work, I need to make it much larger and put the barcode in the center. I’ll test more to be more certain if this is the issue. If not, I’ll try your recommendation for entra.

    Have a great weekend. You can close this for now.

    Thanks
    Jun

     

     

Viewing 5 posts – 1 through 5 (of 5 total)
  • Sign in below to reply.