Skip to content

Shop Floor Insight

Shop Floor “Work Instruction” Box

Viewing 2 posts – 1 through 2 (of 2 total)
  • Author
    Posts
  • #8841
    Shane S.

    Hello,

    There is a box on the right hand side of the Time card screen called “Work Instructions”. In our implementation of Shop Floor Interface, there are product specifications that are shown depending on the item. Which BC table are these instructions stored? We need to update some of these item specifications and are not sure where to access them.

     

    Thank you

    #10639
    Terri V.
    Insight Works

    Hello Shane,

    Indeed, the Work Instructions factbox visible in the Shop Floor Insight web client can display different things.

    To enable the factbox in the web client, you will need to click on the View button, then enable the Work Instructions factbox.

    There are also two settings found on the Shop Floor setup page in the client section. See “Work Instructions Time” and “Work Instructions Quantities”. When these are enabled, you will see the estimated run and setup time, in addition to the amount of time currently tracked for this specific routing line. The quantity information will show you the expected total output for that production order line, the recorded Output and the scrap quantities.

    In addition to all this, if you have any comments added on the released production order header, or on the released production order routing lines, these will also be visible in the Work Instructions factbox.

    Please submit a support request to su*****@*******ks.com for further assistance.

    Thank you,

    Louis

Viewing 2 posts – 1 through 2 (of 2 total)
  • Sign in below to reply.