- This topic has 1 reply, 2 voices, and was last updated 2 years, 2 months ago by Terri V..
-
AuthorPosts
-
28 August 2024 at 1:30 pm #8522JBJohn B.
In one of our BC companies we have different manufacturing sites, the sites have different work weeks, at one site Shop Floor Setup, Hours Before Close, a value of 9 would be desirable, for a different site, 11 would be desirable. Is there perhaps another setup that will achieve this?
29 August 2024 at 6:56 am #9993TVTerri V.Insight WorksHello John,
For the record, this “Hours before close” setting will automatically close an open timecard if upon scanning the SF employee badge in the morning, the system determines that the amount of “inactive time” on that timecard is larger than the “Hours before close” value. When this happens the closed timecard likely will require some adjustments, if say for example, the user was clocked onto an activity, left for the day and did not do “End Shift”. The time would have been accumulating overnight resulting in a much larger run time on that timecard line.
The settings you will find on the SF setup are applicable to all users in that BC company. This includes the “Hours before close” setting. If you wanted to allow users in different locations to have a different value for “Hours before close” this could be done with a modification.
Unless there is any desire to have different BC companies for either location? In which case you wouldn’t have this issue, but I suppose this has likely been ruled out. (having multiple SF services for different BC companies is not a problem)As for the SF shift patterns, these can however be configured as you wish for each group in whichever location, including the start / end times, the configuration of the automatic shift breaks (or not), the calculated rounding rules and the timecard line rounding rules.
I would however argue that the setting “Hours before close” is more of a fail-safe type of setting and that users should always be clicking the “End Shift” button at the end of their shift as this will clock them OFF and also close their timecard for the day. If you have a fairly recent BC version you should be able to configure a barcode that does the same thing as the “End Shift” button if you want.
Another thing I would recommend to avoid situations where the “Hours before close” is (often) closing the timecards is one where perhaps a supervisor can review the timecards in BC after a shift has ended. It is easy to navigate to the list of unposted timecards and put a filter to see which timecard is still open and then perhaps add another filter to only see the shift that just ended. Then the supervisor can review the timecard(s) and close them with the “Close” button on the individual timecard to prevent the accumulation of time. These timecards may still require some adjustments, but this would very much reduce the amount of time tracked after the user has left for the day.
Having users remember to do End Shift is a normal process for each new implementation and I believe this is a training/habit “issue” for the users of the Shop Floor web client. If the users are all doing “End shift” as they should be doing, then the “Hours before close” feature would not ever be used and there would be little to no modifications required on the timecards before they are approved and posted.
Thank you,
-
AuthorPosts
- Sign in below to reply.