Skip to content

Warehouse Insight

Shop Floor Integration User

Viewing 4 posts – 1 through 4 (of 4 total)
  • Author
    Posts
  • #9015
    Andrew S.

    when “Use Additional Insight Works User Login” is toggled on is there some trick to getting the Shop Floor Add-on to work? When this is disabled I can get the shop floor add on to to match the user SFI Employee > User ID = user_id. “Use Additional Insight Works User Login” is toggled on I get the error “You Must have a Shop Floor Employee….” even though according to Inspect Context in the Designer the stored user_id matches SFI Employee > User ID field

    -additional information, in our instance IWX User > User ID does match SFI Employee > No. field

     

    #10928
    Olina T.
    Insight Works

    There may be a gap that has not yet been identified. If that is the case, the matter can be brought back to the development team for further review.

    Thank you for the feedback

    #10929
    Olina T.
    Insight Works

    This was tested in my environment, and the scanner was able to be used while logged in as the Insight Works user.

    Note: A Business Central User ID must be assigned on the Shop Floor Employee Setup record and linked to the Shop Floor user.

    If no User ID is assigned, login is not permitted. As a result, the Insight Works user must match the User ID specified on the Shop Floor Employee Setup.

    No direct connection exists between the Shop Floor Employee Setup and the Insight Works user. The only relationship is through the Business Central user, which is linked to the Shop Floor user

    For example, if the Business Central User ID is Jo**@*******ny.com, and that User ID is assigned to the Shop Floor user, while the Insight Works user is also configured as John, login will be permitted.

    #10930
    Andrew S.

    Thank you Olina, this got me pointed in the right direction. This layout would work for some of our users, where there is only one person assigned to one handheld, in the instance of where handhelds are shared they will just have to keep using shop floor web.

Viewing 4 posts – 1 through 4 (of 4 total)
  • Sign in below to reply.