- This topic has 2 replies, 2 voices, and was last updated 1 year ago by Michael O..
-
AuthorPosts
-
4 November 2025 at 7:31 am #8827MOMichael O.
We’re using a mixed setup with the following configuration:
- Op 10 Work Center Glue Line <- Users will enter the time here
- Op 20 Machine Center Glue Line <- Users will enter output quantity here
We are using this setup because we have different machine and user rates on the same manufacturing line. The output line needs to be a machine center for use with MxAPS. To avoid data entry confusion, is there a way to hide Op 20 on the Time Entry list and Op 10 on the Output list? Thanks!
4 November 2025 at 2:09 pm #10613TVTerri V.Insight WorksHello Michael,
There is a way to filter what operations (aka prod. order routing lines) are visible in the Production Dispatch list in the SF web client. This can be done with the field “Prod. routing custom filter” found on the SF client configuration card. (see the top General section). You could put in a filter to hide operation 20 and show operation 10.
Putting in a filter will hide/display whatever you see in the Production Dispatch list and this will apply to whomever is using the SF client configuration card.
There might be a way to get a configuration that works for you.
A few comments:
If the users are using the job card report to clock onto the routing lines, it doesn’t matter what filters you set for the production dispatch list. There is no way to prevent this clock ON if the users have the barcode.
It is possible to disallow Output via a setting found on the SF client configuration card, see the “Output entry” setting in the Production order section.
In order to record Output, you will require the user to clock onto that routing line. This means you will be accumulating some actual labor time on the operation – even if the user is only clocking on to record the Output.
It is possible to delete time card lines after output has been recorded. On the SF setup page, if you have the setting “Register Output to” and this is set to the Output journal, then the output you record will be saved in an Output journal batch. See the SF client configuration for which output batch.
You can use the SF time card lines page with some filters to see what users have on their time cards. This is the easiest method to find what time cards have a time card line referencing a specific production order routing line for example.Article on dispatch list filtering: https://kb.dmsiworks.com/knowledge-base/production-dispatch-lists-that-boost-efficiency/
Article on consumption and output: https://kb.dmsiworks.com/knowledge-base/capture-shop-floor-data-for-production-orders-in-shop-floor-insight/
I hope this answers your questions.
If you require more assistance I would ask that you please submit a support ticket to su*****@*******ks.com.
Thank you,
5 November 2025 at 1:30 pm #10614MOMichael O.Thanks, Terri!
-
AuthorPosts
- Sign in below to reply.