Skip to content

Advanced Inventory Count

Scanning the bin opens up the line

  • This topic has 1 reply, 2 voices, and was last updated 8 months ago by Michael A..
Viewing 2 posts – 1 through 2 (of 2 total)
  • Author
    Posts
  • #8895
    Sylvain R.

    Hi, we are using Datalogic Skorpio X5 scanner with Advanced Inventory count, and we are seing a strange behavior: if there is an existing line, when scanning the bin code, the selected line on the scanner is opened as if the user had pressed enter to change the quantity. We can then press cancel to continue with scanning the item no. and the remaining. Is it a configuration in the scanner itself, or something in the configuration of the device in BC?

    Ad-hoc movements are working just fine, so we are pretty confused.

    Any idea how we can solve this?

    #10728
    Michael A.
    Insight Works

    Hi Sylvain,

    The issue is due to the Label Suffix having an [LF] in the data wedge settings causing an invisible enter key to be entered. To configure the data wedge settings on the Datalogic Skorpio X5, you can follow the steps below:

    1. Open the scanner settings by going to Settings > Datalogic Settings > Scanner & Decoder Settings
    2. Under Wedge:
      1. Turn Enable Keyboard Wedge On
      2. Turn Enable Intent Wedge On
    3. Under Formatting:
      1. Set Label Prefix to None (Remove all the characters if any)
      2. Set Label Suffix to None (Remove all the characters if any)

     

Viewing 2 posts – 1 through 2 (of 2 total)
  • Sign in below to reply.