Skip to content

Warehouse Insight

Scanning Behavior

Viewing 2 posts – 1 through 2 (of 2 total)
  • Author
    Posts
  • #8599
    Waseem R.

    Hello Team,

    We have encountered a scenario where a 12-digit barcode is defined on the item card, and a corresponding 14-digit barcode (with a prefix and check digit) is placed on the item card.

    Details:

    • System Configuration: An 11-digit barcode will be configured for this item in the system: 07945810198.
    • Receiving Process: A 14-digit barcode label will be scanned during the receiving process: 30079458101981.

     

    Question:

    Is there an option to configure the scanning behavior within the WMS App to automatically pick up the 11-digit barcode without the prefix (30) and the check digit (1)?

    Thanks,

    WR

     

     

    #10166
    Olina T.
    Insight Works

    This is something that is set on the scanner, which includes or excludes the check digits.  It would depend on the scanner model where you change that setting.

    Here is information on how to setup pa zebra scanner, it wont tell you what to change but what area you can find the setting Configure Scanner Settings for Memor 10/20 and Zebra – Insight Works Knowledge Base

    This information should also be in the scanner’s manual.

Viewing 2 posts – 1 through 2 (of 2 total)
  • Sign in below to reply.