Skip to content

WMS Express

Scanner Set-up

Viewing 4 posts – 1 through 4 (of 4 total)
  • Author
    Posts
  • #8658
    Aaron W.

    I purchased an android scanner that uses Scan3Services v1.0.19 out of the box. When testing the scanner with the WMS Express generated barcode, it does not seem to feed the information into WMS Express. The native scanning app, noted above, reads the barcode and inputs the information fine, but when using Warehouse Insight/WMS Express app, it just beeps and does not input the item information. I’m guessing it’s a configuration setting, but unsure what needs to be done for this particular scanner.

     

    Thanks

    #10262
    Michael A.
    Insight Works

    Hi Aaron,

    Thanks for reaching out. The scanner settings will need to be adjusted depending on the make / model of the device. Scan3Services is not an application we’ve configured before and it would be difficult to pinpoint the exact settings required. For generic scanners we can set the barcoding settings to use keyboard prefix / suffix in order to emulate scanning, you’ll need to disable any auto enter settings and ensure the prefix has a < (less than symbol) and the suffix set to > (greater than symbol).

    You will also need to adjust the barcoding settings on the Warehouse Insight application to the above. From the main screen of the Warehouse Insight application, navigate to Menu > Configure (default password is 1234) > Menu > Barcoding

    Set the Barcode Wedge to Keyboard Prefix/Suffix

    Set the Prefix to <

    Set the Suffix to >

    Regards,

    #10265
    Aaron W.

    Thanks, Michael. I was not able to get this to work. Am I understanding correctly, that if I order a scanner through you all (e.g. CipherLab RK25 Mobile computer) will you all be able to help me get that configured to work properly with the Warehouse Insights application?

    #10266
    Michael A.
    Insight Works

    Hi Aaron,

    To answer your question, we would be able to assist you in such cases. I took a look at the manual for the CipherLab RK25. The device should use an application called ReaderConfig to configure the scanner settings. If you’re able to locate the application, you can follow the steps below to configure it:

    1. Open the ReaderConfig application.
    2. Go to Default > Data Output
    3. Set Keyboard Emulation to Intent
    4. Go to Related Settings
    5. Set Intent Action to whibarcode
    6. Set Decode Data to Decode_Data
    7. Go back one page and disable Auto Enter.
    8. Scroll down and ensure the prefix and suffix entries are empty. Once complete, exit the application.
      1. Note: Sometimes the scanner will still not register barcodes even after having adjusted the settings. In such cases, its recommended to reset the Default profile and reconfigure it once more. Go to ReaderConfig > Default > Top right select the option to reset and follow the steps once more.

    In Warehouse Insight:

    1. Navigate to Barcoding and set to Android Intent
    2. Set Intent Action to whibarcode
    3. Set Intent Barcode String to Decode_Data

    Regards,

Viewing 4 posts – 1 through 4 (of 4 total)
  • Sign in below to reply.