Skip to content

Warehouse Insight

Pick document not showing lines

  • This topic has 3 replies, 2 voices, and was last updated 4 years ago by Terri V..
Viewing 4 posts – 1 through 4 (of 4 total)
  • Author
    Posts
  • #8152
    Chase W.

    When I am going to do a pick it doesn’t show any of the columns from the source document. Does anyone know how to fix this?

    #9331
    Terri V.
    Insight Works

    Need to have some questions answered before we can support this:

    1. Do they see any columns? E.g. bin, item, qty, and they are just missing some pieces of information?
    2. Is it a grey grid where information is simply not displayed whatsoever?

    If 1. they can configure the columns by tapping and holding the column header and selecting “Choose Columns”
    If 2. Hard to say, perhaps their scanner version’s first 2 digits (e.g. v2.7) doesn’t match the extension version (e.g. v2.8). Perhaps they are on matching versions and need to “clear the profile”

    #9332
    Chase W.

    1 no columns I even thought it would be hidden and went to see if that would fix it.
    2 it is a grey box that area where information would be

    #9334
    Terri V.
    Insight Works

    Try clearing your cache under ‘Data’ in the configuration menu. If the problem persists, try clearing your profile as well. Once cleared, you will have to re-orient your columns (column visibility, order, etc.), so use this as a secondary resort.

Viewing 4 posts – 1 through 4 (of 4 total)
  • Sign in below to reply.