Skip to content

Warehouse Insight

Option to select or type rather than scan a barcode

  • This topic has 9 replies, 3 voices, and was last updated 10 months ago by Terri V..
Viewing 10 posts – 1 through 10 (of 10 total)
  • Author
    Posts
  • #8762
    Will H.

    I was working with warehouse shipments and I could not choose from the list of displayed sales orders even though I repeatedly tapped on it in the device. I created a barcode for it and scanned it and only then was I able to choose the relevant sales order. Is there some setting that is preventing me from selecting a sales order rather than having to use a barcode every time. I don’t necessarily need a barcode for the document I am working with and thus would like to be able to type in (search) or select it from the list. It seemed to be ok when I was working with purchase receipts in that I could select the PO fine.

    #10483
    Terri V.
    Insight Works

    Hello Will,

    Which manufacturer and what model of device you are using?

    Also, does it have any hardware keys, such as an enter key, that may engage the line selection?

    Thank you,

    #10485
    Will H.

    Hi Terri

    I am using a zebra TC21.

    Usually it is tap on the line to choose it if I don’t have a barcode to scan the document which is commonly the case.

     

    Regards

    Will

     

    #10486
    Terri V.
    Insight Works

    Hello Will,

    We have seen the tap functionality misbehave in the past when using certain types of virtual keyboards.

    If you tap into any text field within Warehouse Insight, you should see a small keyboard icon in the lower right corner. This will allow you to swap to another virtual keyboard. I would recommend GBoard if you have the option.

    If that does not restore your tap functionality, please submit a support request to su*****@*******ks.com for further assistance.

    Thank you,

    #10491
    Will H.

    Hi Terri

    I don’t see the option of a virtual keyboard anywhere on this screen or on any of the tap screens elsewhere that are working. It seems just particular on the ship menu just is peculiar. I searched around the device screen for the virtual keyboard and cannot see one anywhere. I would attach an image here but cannot upload as it tells me to add a description for the source?

     

    #10492
    Terri V.
    Insight Works

    Hello Will,

    Please submit a support request to su*****@*******ks.com for further assistance.

    Thank you,

    #10658
    Alex C.

    Hi,

    I am after the exact opposite behavior. Is there a way I can force selection of a Sales Order in the Ship app to barcode scan only and prevent operators from accidently tapping on orders?

    Cheers,

    Alex

    #10660
    Terri V.
    Insight Works

    Hello Alex,

    If you proceed to the Warehouse Insight Scan Behaviors page in the Business Central environment you’re looking to make the change in, you can change the ‘Scan Required‘ setting for the Application code of your choice.

    This would require the user to Always, Once, or Never scan the barcode during the process in question.

    Thank you,

    #10664
    Alex C.

    Hi Terri,

    I added the SHIP_LIST app to Scan Behaviors and set Scan Required to Always.

    I reloaded the config on the scanner but I can still tap on the orders under the Ship app to select them.

    Can you please let me know if I missed anything?

    Cheers,

    Alex

    #10665
    Terri V.
    Insight Works

    Hello Alex,

    Reload Configuration and/or Clear Cache on the scanner that you’re testing on.

    If that has already been done, please submit a support request to su*****@*******ks.com for further assistance.

    Thank you,

     

Viewing 10 posts – 1 through 10 (of 10 total)
  • Sign in below to reply.