Skip to content

Quality Inspector

Notifications on Receipt for Automatically Generated Tests

Viewing 2 posts – 1 through 2 (of 2 total)
  • Author
    Posts
  • #8899
    Will M.

    I’m at a company using Insight Works Quality Inspector in conjunction with warehousing through Shop Floor Insight.

    I have around 50 items I’ve set up automatic test generation for, with the rule being that tests are generated when the warehouse receipt for the item is posted.

    However, my receivers aren’t being notified that the receipt they just processed is for an item requiring inspection. This means that they’re physically routing this items to our normal received item area, instead of routing them to the inspection area for the test to be processed.

    Is there a setting to notify receiving when they post a warehouse receipt for an item that it created a test that needs to be resolved?

    I’ve messed with the “Check That Tests Exist When” setting in the Quality Inspector Setup, but it was notifying them that an inspection was needed for every item they were processing, whether or not a test was actually being generated.

    #10733
    Olina T.
    Insight Works

    There is nothing out of the box to alert users that a test is available; that is, there is no setting or setup in Quality Inspector.

    However, there is a way to set up a message generation sending to a Teams channel, using Power Automate, see further in our knowledgebase,

    Create a Test in Quality Inspector that is Available with Microsoft Teams – Insight Works Knowledge Base (dmsiworks.com)

Viewing 2 posts – 1 through 2 (of 2 total)
  • Sign in below to reply.