Skip to content

Shop Floor Insight

Multiple Users- One Work Order in Shop Floor

Viewing 8 posts – 1 through 8 (of 8 total)
  • Author
    Posts
  • #8352
    Shameka H.

    Is there a way that multiple users can be clocked on to one Work Order? We sometimes have large orders that require more than one employee to finish and meet the customer deadline, so we need multiple users clocked on to that one work order so we can capture the true production time and output.  Is this possible in Shop Floor?  If so, please provide instructions on how to do so.

    #9687
    Terri V.
    Insight Works

    Hello Shameka,

    Yes, it is possible for multiple Shop Floor employees to clock onto the same operation of the same production order on each of their respective time cards, but someone will need to clock them on manually for each of the time cards. This is because it is 1 Shop Floor time card per employee.

    If you mean to do so across multiple Shop Floor Insight time cards with one barcode, no that isn’t possible.

    However, if you mean to clock onto multiple operations on the same time card, yes this can be done with certain barcodes.

    This is done via the barcode generated from the following two reports in Business Central:

    Shop Floor Production Order Label 4×6
    Shop Floor Production Order Line Label 4×6

    The first report will give you 1 barcode for all routing lines of a Released Production Order and all corresponding production order lines, while the 2nd report will give you 1 barcode for all routing lines for the corresponding production order line. You would have 1 barcode for each Production Order line for the 2nd report.

    These two reports will also consider what current filters you have configured in the Shop Floor Setup page and also the filter set on the corresponding Shop Floor Client Configuration card. See the setting called “Prod. Routing Custom Filter” on either page.

    If for example you are only seeing the operations for Work Center “A” and “B” in the production dispatch list, then scanning the first barcode will clock you onto all routing lines assigned to the BC Work Center “A” and “B”, for all Production order lines. And the 2nd report will clock you onto operations for Work Center “A” and “B” for the Production Order line in question.

    In this scenario, since you would be clocking onto multiple routing lines at the same time, on the same time card, you need to allow multiple open time card lines. This is done via a setting found on the Shop Floor Client configuration card called “Time Entry Mode”. The setting needs to be set to “Auto – same entry only”. Don’t forget to do a CTRL-F5 on the scanning stations after any setting is changed in BC.

    There is also another option for group time cards, but this option will not multiply the amount of time on the production orders. That is to say, if you have 5h of run time for a production order on the group time card and you have say 5 SF employees “on this group time card” you will end up with a total of 5h of run time against that production order. That is all. This group time card functionality is mostly for payroll reasons as this function would also create a time card for each Shop Floor employee on the group time card – for a total of 5 time cards with 5h of payroll time, and there is no multiplication of the run time for the various activities on the group time card.

    If you have any questions, I ask that you submit a ticket to our support portal via su*****@*******ks.com.

    Thank you,

    #10119
    Sayyam A.

    Hi , I want  the shop floor insight report to generate production order label so that if user A scans the barcode then it should automatically starts the clock in for user A only but with current configuration it automatically starts the clock for all the users. I just want to clock in only the user who is scanning the production order.

    I have tried each report but I am unable to achieve it, Is there anyway to do?

    I am using following shop floor reports to generate the barcode for production orders.

    Shop Floor Production Order
    Shop Floor Production Order Label 4X6
    Shop Floor Production Order Line Label 4X6

    Thanks in advance!

    #10128
    Olina T.
    Insight Works

    <div><span class=”size”><span class=”font”>This Congfig behavior is to change on the log-in to ensure that the Config No. Behavior is set to “Change on On Login”</span></span></div>
    <div><span class=”size”><span class=”font”>This is on Shop Floor setup > Client > General> Config No. Behavior = “Change on On Login”</span></span></div>

    #10330
    Alan N.

    Hello, we are looking at purchasing a shop floor data collection app to collect direct labour time against jobs. Your software was looking a strong favourite until I came across this post. This is our scenario:

    We have an assembly process whereby our product takes approx 500 man hours to assemble. We have one production order per finished product with several employees working on the same job (production order) at the same time. We not do have multiple operations on the production order, we have only one operation of “Final Assembly” with a planned time of 500 hours. We will require multiple operators (up to 8) clocked on to the same operation on the same production at the same time, their aggregated time must be posting to BC. Can your software do this?

    Thanks

    #10331
    Terri V.
    Insight Works

    Hello Alan,

    Yes, it is possible for multiple users of Shop Floor Insight to track time against the same exact Production order routing line, or the same Project task (aka Job task), or other non-productive activities.

    Each Shop Floor employee that uses the SF web client will be interacting with their own SF time card. They can clock onto whatever thing they wish. It is possible to have multiple users clock onto the same thing such as a Project task or a Routing line. The time is tracked on the SF time cards, meanwhile the consumption and output recorded from the SF web client for production orders are saved in the consumption or output journal in BC. For Project tasks, any consumption recorded from the SF web client is saved in the Project Journal batch in BC.

    These consumption and output entries need to be posted in BC and the time cards need to be approved and then posted for the tracked time to impact the Released production orders or Projects.

    Thank you,

    #10332
    Alan N.

    Hello Terri

    Thank you for your reply, but I am still confused. You have said in your reply to me that this can be achieved because each employee has their own time card. However in your response to the original question you have said that “someone will need to clock them on manually for each of the time cards”. This seem to be contradicting your answer to me. Extract below:

    Hello Shameka,

    Yes, it is possible for multiple Shop Floor employees to clock onto the same operation of the same production order on each of their respective time cards, but someone will need to clock them on manually for each of the time cards. This is because it is 1 Shop Floor time card per employee.

    Can you please clarify

    Thanks

     

    #10333
    Terri V.
    Insight Works

    Hello Alan,

    The initial question and scenario on this post was perhaps more nuanced than I would have liked and I can understand your confusion.

    The first question on this post refers to a scenario where 1 action would lead to multiple users to clock onto the same production order. This implies the creation of one time card line to track time against one production order routing line, but for multiple employees, meaning the creation of one time card line on multiple time cards. This isn’t possible with the out of the box behaviour of Shop Floor Insight. Not like that in any case.

    The scanning of the SF employee badge is done by each user; where they are “in charge” of their time card. Reminder that it is 1 Time card per SF employee. The time cards are created when the SF employee scans their SF employee badge (barcode) at the beginning of the shift. They are closed when the employee does “End Shift” at the end of their shift. Each time card will usually have multiple time card lines, since users will normally want to track time on different things.

    In summary, each SF employee needs to interact with the Shop Floor web client in order to create their time card for the day so that they can clock ON to the various things they want. Each SF employee can clock onto the same things if they want as explained previously.

    Hope that clears it up for you.

    Thank you,

Viewing 8 posts – 1 through 8 (of 8 total)
  • Sign in below to reply.