- This topic has 1 reply, 2 voices, and was last updated 11 months, 3 weeks ago by Geoff M..
Viewing 2 posts – 1 through 2 (of 2 total)
-
AuthorPosts
-
4 December 2025 at 1:43 am #8843LGLara G.
hi,
Is there any device configuration that requires the bin codes to always be read? With my current setup, when I double-tap a line in a receipt document, for example, and enter the item quantity, I can register the document. But in this way, the system does not require me to either scan or manually enter the location code. Can this behavior be changed? Thanks.4 December 2025 at 12:22 pm #10642GMGeoff M.Insight WorksHey Lara,
Bins being mandatory is actually a requirement you set in Business Central rather than something that is controlled through scanner behaviour. There are a couple different answers depending on what your setup is.
- If bins are not currently mandatory in the specific Location you are using in Business Central, you have two options. Your first is you can create a new Location in the “Locations” screen, scroll to the “Warehouse” fast tab, and ensure “Bin Mandatory” is toggled on, then use the “Item Reclassification Journals” to move all your existing inventory over. This is far from an ideal option, but it will allow you to use options at this Location other than “Directed Put-away and Pick”. Once this is done, your scanner will not let you proceed with any receipts, movements, or shipments without first scanning a Bin provided there are no default bins for those actions specified in the “Bins” fast tab of your new Location’s Location Card; in those instances, it will auto populate with the Bins selected for those specific activities.
Your second option would be to use the “Convert to Warehouse location” function, which can be found by searching for “Locations” then going to “Actions” > “Other” > “Convert to Warehouse location”. You will need to create bins in your Location before doing this and will then be locked into a “Directed Put-away and Pick” setup. You will still need to move your inventory in Business Central from the Bin you selected to be your “Adjusted Bin Code” to the Bins your inventory is actually in in your physical location. - If your setup has Bins specified for receipt, shipment, etc., or is a “Directed Put-away and Pick” Location, the scanner not enforcing a scan is intended behaviour as Business Central will have already supplied the scanner with the Bins it expects it to use. The purpose of this is to cut down on the number of scans warehouse employees have to do, especially if the bins tend to stay consistent for the actions they are performing. You can, if you wish, remove the specified bins from the “Bins” fast tab in your chosen Location’s Location Card and your scanner will not complete any receipts, movements, or shipments until a bin is scanned.
Thank you,
- If bins are not currently mandatory in the specific Location you are using in Business Central, you have two options. Your first is you can create a new Location in the “Locations” screen, scroll to the “Warehouse” fast tab, and ensure “Bin Mandatory” is toggled on, then use the “Item Reclassification Journals” to move all your existing inventory over. This is far from an ideal option, but it will allow you to use options at this Location other than “Directed Put-away and Pick”. Once this is done, your scanner will not let you proceed with any receipts, movements, or shipments without first scanning a Bin provided there are no default bins for those actions specified in the “Bins” fast tab of your new Location’s Location Card; in those instances, it will auto populate with the Bins selected for those specific activities.
-
AuthorPosts
Viewing 2 posts – 1 through 2 (of 2 total)
- Sign in below to reply.