Skip to content

Product Configurator

issue with the Configurator Cost Price

Viewing 2 posts – 1 through 2 (of 2 total)
  • Author
    Posts
  • #9009
    Thomas H.

    We have an issue with the cost price being transferred from the Configurator to the sales quote.

    All Unit Cost prices in the Configurator are set to Manually.

    The issue can be reproduced as follows:

    1. Open the Configurator.
    2. Select the item/configuration.
    3. The Configurator shows a Total Cost Price of 1,573.54.
    4. Close the Configurator.
    5. The sales quote shows a cost price of 1,521.78, which is incorrect.
    6. Reopen the Configurator.
    7. Make no changes.
    8. Close the Configurator again.
    9. The sales quote now shows 1,573.54, which is the correct cost price.

    The question is why the correct cost price is not updated on the sales quote after the first closing of the Configurator, especially since all Unit Cost prices are set to Manually.

    Ændring: Jeg har fremhævet Manually og tilføjet, at der ikke foretages nogen ændringer ved anden åbning. Det er vigtigt for at vise supporteren, at problemet sandsynligvis handler om selve opdateringen/overførslen af kostprisen og ikke en efterfølgende ændring i konfigurationen.

    #10923
    Terri V.
    Insight Works

    Hello Thomas,

    Within the Configurator Setup you can set the Calculate Standard Cost calculation to Never which will return the flat Unit Cost set by Manually.

    Note, this will prevent the Business Central Standard Cost calculations from running (Business Central driven Standard Costing Pre-Sets will no longer apply).

    Thank you,

Viewing 2 posts – 1 through 2 (of 2 total)
  • Sign in below to reply.