Skip to content

WMS Express

How to log out of Warehouse and windows at the same time?

Viewing 2 posts – 1 through 2 (of 2 total)
  • Author
    Posts
  • #8798
    Gina K.

    To avoid the windows account expired token error that we recently experienced (had to create a new scanner account since we couldn’t resolve the token error with our original scanner user windows account), from our Skopio X5 scanner, I need to document the easiest way how the user must log out of both warehouse and windows.

    The log out from the warehouse menu only logs the user out of warehouse.

    What the easiest way/how can the scanner user log out of both warehouse and windows at the same time?  without having to log into configuration to clear data?

    Thank you

    #10563
    Terri V.
    Insight Works

    Hello Gina,

    Clearing the cached token on the device itself would involve performing the steps below:

    1. Open the Warehouse Insight app on the handheld device.
    2. Tap the back arrow until you reach a screen with the Warehouse Insight header at the top. Note: Sometimes, this screen may show the scratchpad instead of being completely blank.
    3. Tap the hamburger menu located in the top left corner.
    4. In the menu, select “Configure” (default password is 1234).
    5. Tap on “Menu” and then choose “Logins.”
    6. Select “Clear Credentials” from the options.
    7. Tap on “Menu” again and choose “Data.”
    8. Press the “Clear Profile” and “Clear Cached Data” buttons. This will remove the refresh token data stored on the handheld device.
    9. Tap on “Menu” once more and then select “Close.”
    10. If you are not prompted to log in again, tap on “Menu” and choose “Sign Out.” Then, log back in using the account associated with that particular scanner

    We can also clear the cache at the device level.

    1. Tap and hold on the Warehouse Insight icon and select App Info.
    2. Navigate to Storage & Cache and select Clear Cache.

    Thank you,

Viewing 2 posts – 1 through 2 (of 2 total)
  • Sign in below to reply.