Skip to content

Quality Inspector

First Article Inspections

Viewing 2 posts – 1 through 2 (of 2 total)
  • Author
    Posts
  • #8923
    Steve F.

    Does Quality Inspector support manually triggering a First Article Inspection for an item and routing it to be inspected three times, with the item being released after all inspections have passed?

    #10759
    Olina T.
    Insight Works

    I’m not entirely sure what you are asking here, I would need more information to provide a better answer. However, I have outlined the standard procedures for test generation below:

    Test Generation Logic Test creation is governed by established Quality Inspector test templates and Quality Inspector generation rules. These configurations ensure consistency across all quality inspections.

    Manual Test Initiation If you need to trigger a test manually, you may do so through the following methods:

    • Quality Inspector List: Select the “Create Test” action located at the top of the list.
    • Document Integration: Manual inspections can be generated directly from source documents, including Sales Order and Purchase Order lines, via the Quality Inspection button.

    System Flexibility

    • Functional Availability: If the inspection button is not visible on a specific screen, we can provide the necessary code for your partner to enable this functionality.
    • Volume: There are no system limitations on the number of tests you can generate; you may create them as frequently as your process requires.
Viewing 2 posts – 1 through 2 (of 2 total)
  • Sign in below to reply.