Skip to content

Product Configurator

Exclude Options to be saved as configuration

Viewing 3 posts – 1 through 3 (of 3 total)
  • Author
    Posts
  • #8661
    Daniel C.

    We’ve been using the product configurator for a few months now, and one of its functions is to take over an existing configuration if the options chosen already exist in the configured items.

    However, is it possible to exclude options from configured items? There are 2 particular cases:

    Case 1 : following the first implementation of a configuration, some options had to be changed, in particular the quantities in certain items added to the BOM

    Case 2 : in the configurator, the options (for example A, B & C) proposed generate a quantity of another option (X) depending on the user’s choices, except that sometimes, even with a different combination of choices A, B or C, we end up with the same quantity of option X

    In the first case, with the same basic choices, an existing configuration would have to be recalled even if the BOM options were different from the original ones (this is a correction), and in the second case, choices A, B and C would not have to be added to the configuration.

    Does this feature of being able to discriminate between options exist?

    Thanks for the information

    #10277
    Terri V.
    Insight Works

    Hello Daniel,

    All options are considered when checking if it’s created the configuration before, if it finds an exact match it re-uses the item, if it does not it creates a new item.

    For example, if A, B, C are different in quantity but results in X being the same, they would then be configured as different configurations and result in different items since A, B, C are not the same.

    Thank you,

    #10290
    Daniel C.

    Yes, I understood that.

    That was the point of my question, so I guess it’s not possible to exclude options in the configuration. Thanks anyway.

Viewing 3 posts – 1 through 3 (of 3 total)
  • Sign in below to reply.