Skip to content

Warehouse Insight

Error (V2.13.8924.2) Unable to log in: Request data is invalid.

Viewing 4 posts – 1 through 4 (of 4 total)
  • Author
    Posts
  • #8529
    Angela F.

    I am having the same issue. Even though I have printed the Software installation page I cannot scan the barcode for step 2. I am trying to scan within warehouse insights. I have a client license.

    I have tried to do this manually by copying and pasting the config details in step 2but when I log in, put the password in and the MFA code, I then get

    Error (V2.13.8924.2)

    Unable to log in:

    Request data is invalid.

    Ensure all configuration has been complete including Assisted Setup.

    The user also gets the same error on a zebra scanner, I am using an android phone.

    This is the webservice on the report, is it correct?

    https://api.businesscentral.dynamics.com/v2.0/d543165c-f956-44fc-86bdc62b4e9f28bf/
    Sandbox_AU_CSEGL_AU_01AUG2024/ODataV4/WHI_ExecuteEv
    entJson?company=ReplaceWithAPercentEncodedCompanyName

     

    Please help, I’ve spent a lot of time on this without any success at this stage.

    #10001
    Angela F.

    I’ve resolved the issue.

    <span class=”ui-provider a b c d e f g h i j k l m n o p q r s t u v w x y z ab ac ae af ag ah ai aj ak” dir=”ltr”>There are two sets of credentials, the first ones with the Microsoft logo is the usual 365 login, with MFA code etc. There is then a second screen that comes up for the user name and password. Here it is Insightworks user and the password specified on that screen.</span>

     

     

    #10049
    Angela F.

    The iss was resolved on my Android phone, but the zebra 33x scanner is still having an issue.

    #10050
    Michael A.
    Insight Works

    Hi Angela,

    Thanks for reaching out. As this is a Business Central SaaS environment, you will not need to use an IIS as you can connect directly to the web service.

    I will outline the general steps to set up an Android scanner below:

    <u>Set up in Business Central</u>

    1. To point to a new location, create a device configuration for the scanner under “<b>Warehouse Insight Device Configurations</b>”. More than one scanner can use the same configuration if they will use the same settings.

    2. Ensure all users that will be logging in to the devices have <b>Warehouse Insight permissions</b> added (User Logins – Insight Works Knowledge Base (dmsiworks.com))

    3. Navigate to the “<b>Warehouse Insight Installation Report”</b>.

    1. Assign the desired Configuration Code.
    2. Ensure that the Service Type is OData, and the Login Method is OAuth.
    3. If you will not be using additional Insight Works user logins, ensure that this is toggled off. Insights Works users are used if more than one person will be using the scanner with the same Business Central credentials, and you wish to differentiate the actions that they perform. If Insight Works users will be used, ensure that they are set up in “<b>Insight Works Users”</b> in Business Central.
    4. When you print or preview/close the report, the report will be generated with 3 barcodes. The first two are for installing the application onto the scanner, and the last, larger barcode will assign the device configuration.

    <u>Set up the Scanner</u>

    1. In the scanner, navigate to a web browser, and once the cursor is in the address bar, scan the <b>Android barcode</b> to download the application. When prompted, install the application and allow all permissions.
    2. Configure the scanning/barcode data settings, see Honeywell Configuration or Configure Scanner Settings for Datalogic Memor 10/20 and Zebra for guides
    3. Open the Warehouse Insight Application. You will be prompted to scan the <b>configuration barcode</b>.
    4. Sign in using a Business Central user. Note that if the “Remember Me” toggle is selected, the user will remain logged in to the device until they are signed out. If a user is continuously logged in on the device for 90 days, you will be presented with a refresh token error and will need to sign out and sign back in again.
    5. (optional) Sign in with the Insights Works User if needed.

    You should then be presented with the main screen of the application.

    If you are ever prompted with a password to adjust the device configuration settings, the default password is <b>1234.</b>
    <div></div>
    <div>Regards,</div>
    <div></div>

Viewing 4 posts – 1 through 4 (of 4 total)
  • Sign in below to reply.