- This topic has 1 reply, 2 voices, and was last updated 1 year, 4 months ago by Erik G..
-
AuthorPosts
-
17 July 2025 at 4:08 am #8738RKRafal K.
Hi,
This is my first post here, so dont bite me if I ask sth obvious.
We’ve just installed demo of insight works to consider implement this in production environment when migrating to BC from NAV at the end of the year, and did some basic configuration thanks to YT channel, but now I’m struggling with some basic questions which acctually decide if I’m able to run that software.
Barcode question – is related with processing output – in standard way, when you go to “output” – then you see production orders and item no, then you click order and go to list of operation nos, click on that operation and then post the output. This is 3 steps operation.
Our barcodes have this structure production_order_no;line_no;operation_no – in old scanner app – user scan this code on output window and he/she goes to output quantity imediately (so this looks like 1 step operation – just scan code and confirm output qty).So tell me – is this behaviour described above possible to achieve? If yes, would please tell me basic instructions how to do it? Thanks in advance.
18 July 2025 at 1:56 am #10444EGErik G.Insight WorksHi Rafal,
The behaviour you’re describing is possible, but would require a minor override (approx. 1 hour effort) to support your existing barcode structure. The barcode structure that Warehouse Insight supports by default for this is:
%P%production_order_no line_no OP:operation_no
So for production order RP00001, line number 10000, operation 10, the barcode would be:
%P%RP00001 10000 OP:10
We could do an override to use your barcode structure for this instead as it contains all of the necessary information.
There is also a setting change required for this to trigger the output quantity dialog automatically after scanning the barcode:
- In Business Central, go to the Warehouse Insight Device Configurations page, then open the relevant device configuration card.
- In the Production section, change the Show Output Dialog setting to “Single Operation”.
- Close the page.
- Reload the configuration on your scanner. To do that, from the Warehouse Insight home screen on the scanner, Press ☰ Menu > Reload Config.
Now, the output process on the scanner would be as follows:
- Open the Output application. The production order list will be displayed.
- Scan the production order barcode. The production order will open filtered to the operation in the barcode, and the quantity dialog will be displayed automatically.
- Confirm the quantity and press OK to post the output.
-
AuthorPosts
- Sign in below to reply.