- This topic has 3 replies, 2 voices, and was last updated 2 years, 3 months ago by Darryl M..
-
AuthorPosts
-
2 August 2024 at 6:44 am #8504MBMatthew B.
Hi
<div>I was hoping someone could point me in the right direction. I’m trying to connect a Zebra DS2278A handheld scanners to a Lenovo Tab P11 Tablets for use with Warehouse Insight. However, when scanning our QR codes to log in to Warehouse insight its being scanned as keystroke inputs and not logging in, even though the settings on Warehouse insight have been configured for Android intent.</div>
<div></div>2 August 2024 at 8:17 am #9956DMDarryl M.Insight WorksHi Matthew,
Thank you for contacting us.
Since you are using a 1D (Wedge Scanner) connected to an Android tablet. The Warehouse application must be set to Keyboard Prefix/Suffix.
To do this, open the Warehouse Insight application. While on the login screen, press the back button until you arrive at the main page of the app where it displays the “Warehouse Insight” header. From here, follow the steps below:
Open the Menu > Configure > Menu > Barcoding
Select the Barcode Wedge field and switch it to Keyboard Prefix/Suffix.
The Prefix must be the “<” character and Suffix must be the “>” character.
Please try this and let us know if you are able to successfully scan.
2 August 2024 at 8:35 am #9957MBMatthew B.Hi
I’ve done this and I’m still getting the same issue. The keystroke for the QR code is the same with “<” before and “>” after
2 August 2024 at 9:47 am #9958DMDarryl M.Insight WorksHi,
Zebra has an application called 123scan that you can download on a desktop/laptop. You would then connect your scanner to this computer and configure the prefix/suffix through here.
You can read about it here: https://www.zebra.com/us/en/support-downloads/software/utilities/123scan-utility.html ↗ (opens in a new tab)
If you are able to connect it here, you will format the scanner so the data is read as <PREFIX><DATA><SUFFIX1> and that the prefix/suffix for the device is as mentioned before “<” and “>” respectively.
If you are unable to connect the scanner to a computer and utilize 123scan, your alternative is to read the manual for the scanner and follow the instructions below.
This is the closest manual (for your scanner) I could find: https://www.zebra.com/content/dam/support-dam/en/documentation/unrestricted/guide/product/ds2278-prg-en.pdf ↗ (opens in a new tab)
In this manual, you will look for a series of barcodes to scan and change the scanning settings of your scanner.
What you have to do is:
1 Set the prefix by scanning the Scan Prefix barcode on Page 91.
2. Scan the Alphanumeric Barcodes combination for the “<” character: 1060 (This will be four barcodes to scan, the barcode for 1, 0, 6, and 0) Page 429-430
3. Scan the Scan Suffix 1 barcode. Page 91
4. Scan the Alphanumeric Barcode combination for the “>” character: 1062 (Similar to the above, you will scan 1, 0, 6, and 2) Page 429-430
5. Finally, scan the Data Transmission Barcode that is formatted as <PREFIX> <DATA> <SUFFIX 1>. This will change it so that the scanning format is as needed. This is around Page 93 of the PDF file.Once you have set this up, try scanning the barcodes again and let us know.
-
AuthorPosts
- Sign in below to reply.