Skip to content

Product Configurator

Configurations differing only by Option Text

Viewing 2 posts – 1 through 2 (of 2 total)
  • Author
    Posts
  • #8715
    User I.

    Hi,

    Is it currently possible to configure items in the Configurator BOM Designer that differ only by Option Text?

    If an item card is created using the configurator, then the same configuration is selected (using Load Existing Configured Item, or just selecting matching options) except with different Option Text for an option, the following seems to happen:

    • No new item card is created (popup says “Item <Item number> already exists for the configuration.”)
    • The properties (e.g. comments formatted with {X.OptionText}) of the existing item do not reflect the new text.
    • However, the new option text is shown if that item is loaded into the Configuration BOM Designer with Load Existing Configured Item.

    This could cause problems, for example, that if two customers request the same configuration for an item, except they specify different text.

    Many thanks.

    –

    #10399
    Terri V.
    Insight Works

    Hello,

    The Item Description Text for the Option Choice does not recognize a unique and separate configuration, based on the description alone.

    If you are referencing the Option Choice with a type Text value (essentially it’s own Option Choice) then that unique selection will create a new item if it has not already been created before, provided that the Configured Item Type is set to Item.

    If you are only changing the text or description for an identical configuration, then you could add another Code that would consist of those descriptions to select from under your Option Choices. Doing this will create a unique item per Option Choice type Text description added to the configuration you build.

    If you need more insight on how this works then you can reach out to su*****@*******ks.com for assistance.

    Thank you,

Viewing 2 posts – 1 through 2 (of 2 total)
  • Sign in below to reply.