Skip to content

WMS Express

CK75 – Scan not working

Viewing 4 posts – 1 through 4 (of 4 total)
  • Author
    Posts
  • #8240
    Matthew D.

    Hello,

    I am using a Honeywell CK75 scan gun.  I have the warehouse insight app installed and running but when I try to scan a barcode, it beeps but the scan is not registered in the app.  It’s like nothing happened.  I went through all of the configuration I could find but must be missing something.  Any ideas what to check?

     

    Thanks!

    #9483
    Brandon E.
    Insight Works

    Hi Matthew,

    This looks like some additional settings need to be configured within the Honeywell Scanner’s settings. To make these changes, please follow the steps outlined below from our knowledge base. The article provides instructions for configuring the settings under the “Configure the Barcode/Scanning Settings” section. You can access the KB article for similar Honeywell Android devices at the following link: http://kb.dmsiworks.com/knowledge-base/device-installation/

    Here are the steps from the article:

    Set up Honeywell scanners for Warehouse Insight

    1. Navigate to Scanner Settings (Settings > Honeywell Settings > Scanning > Internal Scanner > Default Profile).
    2. Select Data Processing Settings and set the following:
    a. Disable Scan to Intent.
    b. Enable Data Intent.
    3. Tap on Data Intent and set Action to whibarcode.
    4. Open Warehouse Insight and navigate to Barcoding (Menu > Configure > Configuration password (1234) > Menu > Barcoding).
    a. Set Barcode Wedge to Android Intent.
    b. Input “whibarcode” in Intent Action.

    #9490
    Matthew D.

    Thank you Brandon for that.  I already have that set exactly.  Is there anywhere else I might need to look?  It’s frustrating because everything works normally except the scanner.  I can use the camera, but obviously that’s not the point of having the scan gun.

    #9492
    Matthew D.

    It’s working now!

Viewing 4 posts – 1 through 4 (of 4 total)
  • Sign in below to reply.