Skip to content

Warehouse Insight

Cipherlab RS38 Barcode Scanner Configuration

Viewing 2 posts – 1 through 2 (of 2 total)
  • Author
    Posts
  • #8682
    Robert S.

    Hi team

    I have an issue with the scanner CIPHERLAB RS38.  The scanner with the Android camera function reads the barcodes very well.  However, when I try to read the barcodes with the native scanner it doesn’t work.

    Did I forget any configuration or setup?

    Regards

    #10306
    Darryl M.
    Insight Works

    Hi Robert,

    Please follow the steps below to set up the CipherLab scanner. Before following these steps, ensure that the Warehouse Insight application has been downloaded on the scanner.

    1. Look for Reader Configuration.
    2. Go to Default. Then to Data Output
    3. Set Keyboard Emulation to Intent
    4. Go to Related Settings
    5. Set Intent Action to whibarcode
    6. Set Intent Decode Data to Decode_Data
    7. Go back one page and Disable Auto Enter
    8. Scroll down and ensure the prefix and suffix entries are empty. Exit the app.

    In the Warehouse Insight application, open the menu, go to Configure > enter 1234 (default password).

    Then in the System page, open the menu again and choose Barcoding.

    In this page, ensure that the settings are as follows:

    1. Set to Android Intent.
    2. Set Intent Action to whibarcode.
    3. Set Intent Barcode String to Decode_Data.
Viewing 2 posts – 1 through 2 (of 2 total)
  • Sign in below to reply.