Skip to content

Warehouse Insight

Changing units of measurements

Viewing 3 posts – 1 through 3 (of 3 total)
  • Author
    Posts
  • #7978
    Karen P.
    Insight Works

    Does Warehouse Insight provide assistance in convert between units of measures? We have a customer that stores inventory in 3 different box sizes. Does the handheld support changing units of measures on the pick and the putaway? Also they sometime must pick a larger box to pull some part out and then place the remaining in a break bulk bin to be repackaged later.

    #9030
    Insight Works
    Insight Works

    >> Does the handheld support changing units of measures on the pick and the putaway?
    Yes, you can select different item units of measure on the handheld, and can configure which unit of measure is displayed by default on a per item/item category and application basis. E.g., at receiving you could use the put-away unit of measure by default, but use the base unit of measure or document UoM when picking.

    >> Also they sometime must pick a larger box to pull some part out and then place the remaining in a break bulk bin to be repackaged later
    If “advanced warehousing” is on in NAV, the scanners will support the NAV breakbulk instructions.

    #9171
    Michael P.

    Regarding: “Changing the default UOM”. Where has that to be managed? Is that in the “design” configuration or in”Device configuration” or..?

Viewing 3 posts – 1 through 3 (of 3 total)
  • Sign in below to reply.