- This topic has 3 replies, 2 voices, and was last updated 1 year, 3 months ago by Will H..
-
AuthorPosts
-
8 August 2025 at 10:14 am #8753WHWill H.
I’ve installed the warehouse insight onto BC and got the barcode under Device configurations. I used google lens on the android zebra (TC27) to scan the barcode and it does nothing. I have tried multiple ways including just with the camera – it doesn’t recognise it. Is there an alternative way to set the device up?
11 August 2025 at 2:40 am #10462WHWill H.Correction – it is a zebra TC21
11 August 2025 at 12:02 pm #10464TVTerri V.Insight WorksHello Will,
You will need to configure the barcoding settings on your Zebra device prior to the device being able to recognize any Warehouse Insight specific barcodes. It is also intended to use the scan engine on the device rather then google lens, the scan triggers are side-mounted on the left or right side of the device.
Here are the barcoding configuration instructions specifically for Zebra devices:
- Scan and Install the Warehouse Insight application onto the Zebra device.
- This is to download the Warehouse Insight Profile.
- Open DataWedge.
- Select the Warehouse Insight profile.
- Select Associated apps, If there is no icon next to the “*” entry, you will need to recreate this entry.
To recreate the entry, do the following:
- Tap and hold the incorrect entry until you get the option to delete the entry and delete it.
- Click on the three dots in the top right corner and select to add a new entry.
- Scroll down the list and select **com.insightworks.warehouseinsight**. This list is alphabetical.
- Next select the “*” option.
- In the Keystroke output section, clear the enabled checkbox.
- In the Intent Output section. Configure this section as follows:
- Intent Output: Enabled.
- Intent action: whibarcode
- Intent category: Make sure this is blank.
- Intent delivery: Broadcast Intent.
- Disable basic data formatting and advanced data formatting.
If you require further assistance, please submit a support request to su*****@*******ks.com.
Thank you,
19 August 2025 at 6:38 am #10479WHWill H.It was the software to download on the device that was the issue. There was no obvious link in the instructions to download software for the device so I downloaded the suggested device software that was recommended under the on-premise section (even though I am setting up on the cloud) and it works ok now.
- Scan and Install the Warehouse Insight application onto the Zebra device.
-
AuthorPosts
- Sign in below to reply.