Skip to content

Product Configurator

Bulk Configurator limited to 30 attributes

Viewing 3 posts – 1 through 3 (of 3 total)
  • Author
    Posts
  • #8888
    Hritika S.

    Hi,
    Customer uses the Configurator to generate items with more than 30 attributes.<br data-start=”2220″ data-end=”2223″ />When using Bulk Edit Visibility, the system displays the message that only the first 30 options are included.<br data-start=”2332″ data-end=”2335″ />Customer requires more than 30 attributes to be editable in Bulk Configurator when creating multiple items.<br data-start=”2442″ data-end=”2445″ />Requesting confirmation whether this limit can be increased or if Microsoft can provide a configuration/extension workaround.

    The error says, “The bulk editor is limited to 30 options. If more than 30 options are set for visibility only the first 30 options based on disaply order will be included.”

    And yes, there is a Typo error too, instead of ‘display’ it says ‘disaply’

    #10717
    Terri V.
    Insight Works

    Hello Hritika,

    It is not possible to increase the maximum number of options shown in the Bulk Editor through configuration nor an extension. It would require product changes to increase its limit.

    Depending on the customer’s interest it is something we may consider. However, please contact our pre-sales team for more information. Thank you for noticing the typo in the message, we will look into updating it in a future release.

    Thank you,

    #10718
    Hritika S.

    Hi Terri,
    Thanks for the reply. Will check it with the pre-sales team.

Viewing 3 posts – 1 through 3 (of 3 total)
  • Sign in below to reply.