Skip to content

Shop Floor Insight

Book time against multiple job tasks simultaneously

Viewing 3 posts – 1 through 3 (of 3 total)
  • Author
    Posts
  • #8496
    Mathew B.

    Is it possible for a worker to book time that is applicable to multiple job tasks such that the time cost is automatically spread across the job tasks?

    For example, when a cutter operating a CNC machine is cutting pieces for 3 different jobs at the same time so as to maximise use of the material, the time taken needs to be spread across the 3 jobs.

    #9937
    Terri V.
    Insight Works

    Hello Mathew,

    Yes, this is what we call the Automatic time splitting functionality.

    The costing calculation will be in accordance with how you are configured. This is set on the Shop Floor Setup page, in the “Payroll” section, there is a setting called “Use Direct Labor Cost From”. In most cases, the “Default” option is selected here, which just means the system will use the cost as configured on the BC Work Center (or Machine Center) for the specified WC/MC on the Shop Floor time card line along with the total run time or setup time. There are other configurations, but it is mostly the cost found on the BC WC/MC that is used.

    The automatic time splitting functionality will allocate the time to the operations once you’ve clocked OFF. How the time is allocated will be in accordance with the configuration for the time splitting found on the SF WC/MC cards. The costing is then simply the calculation based on the run time allocated to each time card line and the corresponding WC/MC. (unless you are using a different costing configuration where perhaps the SF employee card or the SF WC/MC card might also be involved).

    Please see this page here for more information on the automatic time splitting function: https://kb.dmsiworks.com/knowledge-base/configure-shop-floor-insight-for-automatic-time-splitting-scenarios/

    If you still have questions, I recommend you submit a ticket to our support portal via su*****@*******ks.com.

    Thank you,

    #9938
    Mathew B.

    Hi Terri

    Thank you! This is perfect. not sure why I missed it when looking through the Knowledge Base…

Viewing 3 posts – 1 through 3 (of 3 total)
  • Sign in below to reply.