- This topic has 1 reply, 2 voices, and was last updated 2 years, 2 months ago by Terri V..
-
AuthorPosts
-
17 September 2024 at 4:05 am #8541TKTerje K.
I have customer that needs to register assembly order output in small batches, every batch gets separate Lot no. and consumption is registered based on BOM. So basically in BC if you mark in the assembly order header Quantity to assemble smaller amount then Quantity then on the lines Quantity to Consume is automatically recalculated related to BOM. Now if i post it, components are consumed and output is registered. I don’t need to register consumption and output separately. If i would like to do it same in scanner then how can i do it?
I tried it in scanner but encountered some problems. I opened in scanner Assembly order. Scanned Order number. It opened up assembly order with components. If i try to post output I get Error (v2.13.8908.1) You need (x) more (KG) (Item no) when output (y)(M)(Item no2). Basically it tells me i need to firstly register consumption. Is it possible to set up so that it would not ask me to consume items but would consume them automatically based on BOM or do i need to always register consumption qty before? So i then registered consumption qtys by scanning items and inserting qty to consume. Then i tried to post output but got Error (v2.13.8908.1) You must assign a lot number for item Y (item that I’m assembling). Item has on item card Lot nos. number series marked. On device configuration under Receiving and under Production i have marked Yes for Auto Create Lot/Serial Numbers. Why it is not creating automatically lot no nor it allows me to assign it in scanner manually?
18 September 2024 at 7:19 am #10031TVTerri V.Insight WorksHello Terje,
There is not an out of the box setting that will allow you to have the ability to register both consumption and output at the same time on the scanner.
You do need to always register consumption quantity before consuming them. There are some settings in Device Configuration, like ‘Allow Qty Change’ or ‘Allow Negative Consumption’, that will allow you to set some of the parameters of the quantity that will be allowed to be consumed.
Regarding the Lot numbers not populating automatically on Output. If you have set the Device Configuration to allow for automatically creation of lot/serial, you can try first ‘Reload Config’ and if this doesn’t work you may have to clear cache on the handheld.
Reload Config needs to be done on the handheld after anytime you change the Device Configurations or Scanner Behaviors. To go to ‘Reload Config’
Main Warehouse Insight Screen=>Menu=>Reload Config
Clear Cache from handheld:
Main Warehouse Insight screen=>Menu=>Configure=>1234=>Menu=>Data=>Clear Cached Data=>Close=>Menu=>Reload ConfigIf this doesn’t work, you can try clearing Data and Cache from the Warehouse Insight app itself.
Exit out of Warehouse Insight=>Long Press on Warehouse Insight App=>App Info=>Storage=>Clear Data=>Go back into Warehouse Insight.
This will force you to log into Warehouse Insight again.
Thank you,
-
AuthorPosts
- Sign in below to reply.