- This topic has 3 replies, 2 voices, and was last updated 1 year, 5 months ago by Terri V..
-
AuthorPosts
-
21 May 2025 at 10:10 am #8718DGDesiree G.
Does anyone know how to integrate the C=0 AQL sampling plan in the Quality Inspector AQL Sampling Plan?
21 May 2025 at 11:31 am #10392TVTerri V.Insight WorksHello Desiree,
Yes.
Presuming you are using samples with AQL configuration, then you would be choosing the combination of the AQL level and inspection level combined with your sample size that result in a Rejection Point of 1.
The default inspection level and default AQL level can be defined per-template, or globally on the Quality Inspector Setup.
If you’re using the demonstration AQL data that comes with the Quality Inspector Wizard then there would be several configurations that would end up in a Rejection Point of 1.
To walk through an example:
1) Setup verification on the “Quality Inspector Sample Size Configuration”.
On the “Quality Inspector Sample Size Configurations” make sure the demo data from the setup wizard has populated, and ensure you have entries.
Our example will use the entry that maps Inspection General Level II for a minimum lot size of 2 and maximum lot size of 8, resulting in the standard sampling plan code ‘A’.This is telling the system that lot sizes between 2 and 8 for general level “II” will result in the mapping code of “A”.
This data should already exist from the Quality Inspection Setup Wizard.
2) Setup verification on the AQL Sample Plan Configurations.
There should already be entries in here from the Quality Inspector Setup wizard.
On the “Quality Inspector AQL Sampling Plan”, make sure there is a mapping for the code of “A”, General Level II, with the AQL level that you want (our example will use 0.07.
The example data will have this as a sample size of ‘2’
In it you’ll notice your Acceptance Point is 0, and your Rejection Point is “1”.3) For an AQL failure (to make it fail as soon as you’ve reached the rejection point), define the “Reject Grade”.
This is not demo data, and will require you to define.
You have the opportunity to define different rejection grades depending on the circumstance.In our example find the row for Code=A, Sample Size=2, General Level 2, with an AQL of 0.07, Acceptance Point =0, Rejection Point = 1.
Set the ‘Reject Grade’ value to ‘FAIL’ (if using the out of box example failure grade, or your own preferred failure grade).3) On the Quality Inspection Template make sure the default General Inspection Level is Set, and the Default AQL Level is set appropriately (our example uses 0.07 ).
4) Create an example Quality Inspection Test with the quantity between 2 and 8 to match the configuration from step 1. Your sampling plan should default in automatically with ‘A’ and a suggested sample size of ‘2’ to match the configuration.
5) Record your samples, you’ll now notice that as soon as you have 1 failure (meets the rejection point), then it will fail the line and the test.
If you’re not using AQL sampling then you could just choose “First Failed Value” as the sample summary for your Quality Inspection Field.
Thank you,
30 May 2025 at 9:33 am #10403DGDesiree G.Hello,
The Set levels in quality inspector do not work for our AQL sampling plan. The set AQL method within the software is based on ANSI Z1.9 meaning you accept and reject on a certain qty. We use ANSI Z1.4 C=0, which have 16 AQL levels, and there are no allowed rejected units in the lot.
I want to completely modify the levels to encompass the C=0 method. Is this possible?
6 June 2025 at 11:56 am #10405TVTerri V.Insight WorksHello Desiree,
Yes, this should work as described.
You can support all 16 levels in Z1.4 by altering the “AQL” field and following the previous instructions, which is the “Acceptance Quality Level” and setting the rejection limit as described.
The Acceptance Quality Level setting should not be confused with the “Inspection Level”.
To not set rejection limits that result in an AQL failure you simply do not define a Reject Grade,
however, if you want it to fail with 1 sample regardless of lot size you’d still have a rejection point of 1 (meaning 1 or more fails ), and define the Reject Grade.To have C=0, it simply means that 1 failure results in a failure of the entire lot, which does work and seems to be your described effect.
There might be confusion between “inspection level” (which is Level 1,2,3, S1, S2, S3), which ‘Acceptance Quality Level’, which would be the number such as 0.04, 0.065, 0.10, 0.15, 0.25, 0.40, 0.65, 1.0, 1.5, 2.5, 4.0, 6.5, 10.0, 15.0.
Thank you,
-
AuthorPosts
- Sign in below to reply.