Skip to content

Warehouse Insight

Android Tablets and Bluetooth Scanners

Viewing 3 posts – 1 through 3 (of 3 total)
  • Author
    Posts
  • #8931
    Sean H.

    For our current WMS system, we use Samsung Galaxy A9+ tablets and Socket Mobile S720 Bluetooth mobile warehouse scanners but I’m unsure how to configure the scanner to work with the warehouse insight app on the adriod tablet.

    When setup in normal application mode, only the enter command from the scanner is registering but I need the actually configuration to get the scanner working with the app.

    Can someone provide me assistance on this?

    #10797
    Wade R.

    We are also interested in connecting to Warehouse Insights with the Galaxy Android with bluetooth scanners…is there anything available on what brand of scanner is compatible with both Android and Warehouse Insights?

    #10803
    Terri V.
    Insight Works

    Hello Sean & Wade

    For any Android tablets or devices with no built in scanner, the Bluetooth device will need to be configured in such a way that incoming scans include a built in prefix and suffix of “<” and “>” respectively. Additionally most Bluetooth devices come stock with a Line Feed (LF) or Carriage Return (CR) prefix configured by default. Either of those prefixes will need to be removed prior to assigning the required prefix and suffix. The Bluetooth device manual will include instructions and configuration barcodes that will allow you to remove the CR/LF and add the < and > objects to your scans.

    Once your Bluetooth device is configured such that your incoming scans match the format below, you can configure Warehouse Insight to receive that scan format using the instructions below.

    Bluetooth Barcode format:
    <BARCODE DATA>
    Note that the data from the barcode will need to be contained between the wedge brackets and there needs to be no LF or CR suffix at the tail end of the scan.

    Configuring Warehouse Insight:
    In your Warehouse Insight application you can select the menu in the upper left corner and select the “Configure” menu. It will prompt you for a configuration password which is 1234 by default. You can then select the menu in the upper left corner again and select “Barcoding”. Match the configuration in the barcoding menu to the image below and Warehouse Insight will properly receive any scans that the Bluetooth device sends with that format.

    Most Bluetooth scanners are compatible as long as they have the capacity to be configured with prefixes and suffixes, but you can find all our recommended hardware at the link below.
    https://dmsiworks.com/marketplace

    Please submit a support request to su*****@*******ks.com for further assistance.

    Thank you,

Viewing 3 posts – 1 through 3 (of 3 total)
  • Sign in below to reply.