Standard Deviation per Operation for Microsoft Dynamics 365 Business Central
An operation can hit its expected time on average and still be out of control, taking minutes one time and hours the next, which disrupts schedules and costing even when the average looks fine. Routing Analysis reports the standard deviation of recorded run times for each operation in Business Central, a measure of how widely individual results spread around the average.
A high standard deviation points at an operation that does not run the same way every time.
How Standard deviation per operation works in Routing Analysis
- Generate Routing Analysis for a routing and date range.
- Read Actual Std. Deviation beside the average difference for each operation.
- Open Explain Actual Standard Deviation for an operation that varies widely.
- Review the production order lines behind it to see which orders differ most.
- Take the finding to the shop floor, or adjust the routing if the standard itself is wrong.
Key capabilities
Consistency per operation
Actual Std. Deviation on each line measures how much recorded run times per unit vary across the production order lines behind that operation.
On a common footing
The calculation works in hours per base unit, so results recorded in different units compare fairly.
Every step shown
The Explain Actual Standard Deviation page sets out each step, from the mean time per unit, to each entry's deviation, to the final figure.
The orders behind the number
The same page lists the production order lines used, with hours per line, finished quantity, and each line's deviation, so an engineer can see which orders pulled the figure up.
Go looking for variability
Set a minimum standard deviation to list only the operations that vary more than you are willing to accept.
See Standard deviation per operation on screen
Real screens from Routing Analysis, shown with demo data.
Details that matter on the floor
An average can hide the problem
Two operations with the same average can behave very differently. Standard deviation separates the one that runs the same way every time from the one that swings widely.
It reports, the floor explains
Routing Analysis shows that an operation varies; it does not say why. Training, tooling, material, or the way time is recorded are questions for the shop floor.
Who uses Standard deviation per operation
Manufacturing engineers
Find operations that do not run consistently and work out why.
Quality assurance specialists
Treat time variability as a process signal, since an operation whose duration swings widely may also produce inconsistent output.
Production managers
Plan around operations whose times are predictable, and target the ones that are not.
Questions about Standard deviation per operation
Can Business Central show how consistent an operation's run times are?
Yes, with Routing Analysis. Routing Analysis reports the standard deviation of recorded run times for each routing operation, alongside the average difference from the routing.
Why does standard deviation matter if the average is on target?
An average can hide wide swings. An operation that takes minutes one time and hours the next makes schedules and costs unreliable, even when the average matches the standard.
Can I see how the standard deviation was calculated?
Yes. The Explain Actual Standard Deviation page walks through each step and lists the production order lines used.
Is this statistical process control?
No. Routing Analysis gives a standard deviation figure for each operation. It does not draw control charts or calculate control limits.
Related Routing Analysis features
All Routing Analysis features →Part of Routing Analysis
Optimize production with routing analysis to reduce variability and enhance costing accuracy.
Have a question about Standard deviation per operation?
Send us a note and the Routing Analysis team will reply by email. Ready to plan a rollout? Contact your Microsoft Partner.
