Skip to content
Routing Analysis app iconRouting AnalysisCorrection

Edit Routing Times in Place for Microsoft Dynamics 365 Business Central

Finding a wrong standard is only useful if it gets fixed, and correcting a certified routing usually means finding it, changing its status, editing the time, and certifying it again. Routing Analysis lets an engineer change setup, run, wait, or move time directly from the analysis line in Business Central, and handles the routing status steps behind the scenes.

The new time goes onto the routing itself, so production orders created from it afterward use the corrected standard.

How Edit routing times in place works in Routing Analysis

  1. Generate Routing Analysis for the routing and date range.
  2. Find the operation whose standard no longer matches the recorded times.
  3. Choose to modify setup, run, wait, or move time for that operation.
  4. Enter the new time and choose OK.
  5. Routing Analysis updates the routing and handles the under-development and recertification steps.

Key capabilities

Four times, one line

Setup Time, Run Time, Wait Time, and Move Time can each be changed from the operation's line in the analysis.

A dialog for each change

Changing a time opens a Modify dialog, such as Modify – Run Time, showing the new value with its unit of measure.

Status handled for you

Routing Analysis puts the routing under development, makes the change, and certifies it again, so the engineer does not walk through those steps manually.

Units in view

If work centers mix minutes and hours, add the Run Time Unit of Measure Code field to the filter settings through Personalize, so it is clear which unit a time is in.

Evidence beside the change

The average difference and standard deviation stay on the line being edited, so the correction rests on what the floor recorded.

See Edit routing times in place on screen

Real screens from Routing Analysis, shown with demo data.

Details that matter on the floor

Write access to routings

Editing a time changes the routing itself, including certified routings, so users who make corrections need write access to routings.

Agree who corrects standards

Manufacturers with formal approval for routing changes should decide which users correct standards from Routing Analysis, since a change takes effect on the routing straight away.

Who uses Edit routing times in place

Manufacturing engineers

Correct routing standards as soon as the recorded times show they are wrong.

Production managers

Get schedules built on times that match the floor.

Cost accountants

Get costing based on corrected standards.

Questions about Edit routing times in place

Can I change routing times from Routing Analysis?

Yes. Routing Analysis lets you change setup, run, wait, or move time from the operation's line in the analysis.

Do I need to set the routing to Under Development first?

No. Routing Analysis puts the routing under development, makes the change, and certifies it again for you.

Who can make these changes?

Users need write access to routings, because the change is made to the routing itself, including certified routings.

Routing Analysis app icon

Part of Routing Analysis

Optimize production with routing analysis to reduce variability and enhance costing accuracy.

Have a question about Edit routing times in place?

Send us a note and the Routing Analysis team will reply by email. Ready to plan a rollout? Contact your Microsoft Partner.

Ask a product question

Product Questions