On demand · Product video
Track tool usage on quality inspection tests in Quality Inspector
For quality teams that need to record which gauges and instruments were used for each measurement, including their serial numbers.

Summary
Quality Inspector can track which tools are used for each measurement on a quality inspection test. The video sets up available tools, either generic names or specific instruments that can reference items, fixed assets, or resources in Business Central, and flags when a tool identification number is required. It then assigns tools to individual fields on a template and records tool usage on a test from the tools panel, by clicking a tool or using Record Tool Usage. Tools that still need an identification number show in red until one is entered.
Key topics
- Set up generic or specific available tools
- Require a tool identification number
- Assign tools to fields on a template
- Record tool usage and serial numbers on a test
Read the transcript
We’re going to review how you can configure tools, use them on templates, and then record tool usage on quality inspection tests. The first step is to configure the available tools in your system. These can be generic text, or they can refer to specific tools. For example, you could have an entry as simple as a caliper, or if you wanted to, you could list your individual calipers. The choice is yours. You can also have tools that reference other parts of Business Central; most notably, they can reference items, fixed assets, or resources.
You can also require that the tool identification number, or the serial number of that tool, is recorded on the test, and we do that with this Required flag. We’re going to see later in this video that when this is required, the tool is highlighted in a different color when the tool identification number is missing. So right now we’re just configuring the available tool options.
The next step is to configure which tools we want to use for which measurement specification on the test. To do that, we navigate to the quality inspection template. We open our template, and we’ll choose Bicycle Checklist. In my scenario, I’m using a balloon or bubble style of template. For my gear shift check, if I want to configure the tools used to validate that value, I simply click Tools. Now I can see and change the tools I need for this specific step.
In this case, perhaps I want to require that a caliper and a height gauge are used. You could remove a tool simply by unchecking it, but in this case we have a test that’s already using it, so it doesn’t allow us to remove it, because a test has recorded tool usage. Let’s look at our brake check tools, and we can see that a caliper is required as well.
If we navigate to Tools here, we can see we don’t yet have any tools. You can add a tool for this measurement specification, this field on this template, simply by clicking it. Perhaps I could use a height gauge, or you can add an existing tool from the list, such as a coordinate measurement machine, or one of the other tool types. Let’s choose a height gauge. All right, so now we have tools on our gear shift, another caliper on our brakes, no tools configured for the visual weld check, and one tool required for our handlebar alignment.
Once you have your tools defined on those steps, you’re going to see a tools panel on the right-hand side. In this case, I have tool usage recorded for my caliper and my height gauge for this gear shift check. If I move to the brakes, I can see that I’ve also recorded caliper usage with that serial number. For the visual weld check, there are no tools, and for aligning my handlebar, a height gauge is needed.
If I choose Record Tool Usage, I have the option to flag that I’ve used the tool and also specify the identification number. In this scenario, I’ve already used this tool and defined which tool I’m using. Let’s record tool usage from scratch on another quality inspection test. If we look down in the tool section, we’re going to notice that the caliper is highlighted in red. It’s red because we configured the tool to require identification.
If we open our tools again, it’s this Identification Number Required flag that causes the red, and it’s occurring because we haven’t recorded the identification number for that tool. We also haven’t used these tools on this test yet.
There are two easy ways to record tool usage, depending on the device you’re using and your process. When you’re on the step itself, you can simply click Record Tool Usage and check the boxes as you use the tools. In this case, it’s still flagged red because we still need an identification number, so I choose serial number three for that caliper. Now we see in the FactBox that everything’s highlighted as good.
If we move to our brake section, we’re going to notice that the caliper for this step is still unflagged. You could use Record Tool Usage here as well, or you can just click it, or tap it on your device. Because the tool identification number is configured as required, it prompts us for the serial number or tool identification number. So I put in serial 00003, and it flags the tool as used and tracks the identification number.
If I click on my height gauge, we’re going to notice it’s not red. That’s because the identification number was configured as optional, but I can still toggle it by clicking it: I’ve used it, or I haven’t used it yet. Alternatively, you can choose Record Tool Usage and flag it as used. That’s how you configure available tools in your system, require those tools for specific measurement specifications on your templates, and record tool usage on your tests.
Questions about this webcast?
Send your question and the Insight Works team will reply by email. Ready to plan a project? Contact your Microsoft Partner.
Ask a question
More recordings
Webinar recording · 38 minBusiness Central quality is a starting point: Here’s how partners take it furtherQuality InspectorRecorded May 2026
Webinar recording · 60 minTransform your quality assurance process with Dynamics 365 Business CentralQuality InspectorRecorded February 2026
Product video · 6 minCollect quality test values in Microsoft Teams with adaptive cards in Quality InspectorQuality InspectorRecorded December 2025