Skip to content

On demand · Product video

Run an inventory count from setup to posting in Advanced Inventory Count

For warehouse and inventory managers preparing a full physical count or cycle counts who want to count by scanner or on paper and reconcile before anything posts.

Recorded November 15, 2023 · 63 minutes

Advanced Inventory Count count to posting video thumbnail

Summary

This recorded session walks through a complete inventory count in Advanced Inventory Count, from setup to posting. It explains directed and non-directed counts, then sets up an inventory count card for a location with an inventory as of date, count sheets by team or warehouse area, and optional bin blocking. Count sheets are generated with filters for inventory, empty bins, and active items, and counts are recorded on a handheld running Warehouse Insight by scanning the bin, the item, and any lot or serial number, or entered from paper count sheets. A baseline sheet, the count difference analysis report, and the count difference summary show the discrepancies, including lot and serial numbers, and recount sheets are created by threshold or spot check with a full audit trail. Finally, the count is copied to the physical inventory journals, checked with the Insight Works test report, and posted.

Key topics

  • Set up a count card with an inventory as of date and count sheets
  • Record counts on a handheld by scanning bins, items, and lot or serial numbers
  • Reconcile with a baseline sheet and generate recount sheets
  • Copy the count to the journals and post the differences
Read the transcript

Hey! Good morning. Afternoon. Everyone. This is Mark here. And today we’re going to go through the Inventory Counting capabilities within Business Central, specifically using the Insight Works’ Advanced Inventory Count module. Really what we want to focus on today is how do we do counts in Business Central. And you really have three options. So these first two are built into Business Central and you can use those today. You don’t need any extra software obviously to do Inventory Counts. You can use a physical inventory journal and you can actually use that with Warehouse Insight or WMS Express.

So you don’t need the Advanced Inventory Count to do barcode scanning to record your inventory, count the issues with the physical inventory Journal, it’s fairly basic. You know, it doesn’t track lot numbers of serial numbers. It doesn’t work well with without bins, those sorts of things. But you can do your inventory count using the other option as a little more recent addition to the Business Central world. Two years ago or five years ago, there’s a physical inventory order module within Business Central. It’s a little more complicated to use, actually a lot more complicated to use in the physical inventory journal.

But it does you know, they did sort of incorporate some of the things that we do in the Advanced Inventory Count to make counts a little better. So you can have multiple, you know, sheets like recordings and things like that. So there are some benefits to using this and it can do the basic log number and serial number reconciliation, but it’s not great. It’s easy to break it by counting serial numbers a lot and using properly. And then it’s it’s a bit of a mess. But both of these can be used and they work reasonably well if you’ve got some basic inventory stuff.

And down here it tells you where you may or may not want to use those particular modules. But of course what we’re focused on today is the Advanced Inventory Count. And a lot of people ask, well, what are the differences between sort of the built in stuff and the advanced stuff? And we’re going to go through each bullet point here. But really some of the big things, it just makes it easier to execute your counts and it can reconcile those log numbers and serial numbers. And it’s got automatic recounts and things like that. So it just makes it a lot easier to execute your count if you’ve been doing counts in have or Business Central using the built in tools, chances are you’re doing a lot of work in Excel.

You’ve got a stack of highlighters and post-it notes beside your desk. Those kinds of things go away if you use that. So all right, so let’s get into it. We’re going to go through some training and show you how to use that advance in toward health. So first thing I want to talk about is a little bit of the process for how you do an inventory talk, which I think that’s count. So there’s two types of counts you can do technically three, but the direct account where we call directed or sort of non defined account or sorry to find out what that means is the system will tell you which items you need to go out and find and count.

So it’s typically best to recycle accounts and a lot of people use it for physical accounts as well. But that will go in just like if you use the physical inventory journal or the inventory recording, you’ll go in and say, here’s a list of items you need to go out and find and count and tell me what the quantities are. And again, recycle accounts where you’re doing a partial count or something like that. That’s great. The other mode is what we call non-direct ID, some people call it “Blind,” but all accounts are “Blind,” but it’s “Non-directed.” And what that means is we’re not telling you what items might be out there for you to find and tell you.

Just go out there and you scan everything that you find so clearly that’s best if you’re using barcode scanners because it’s not telling you what should be there. You’re you’re going out and scanning everything that’s there, reporting back to the system, what you found, and it’ll tell you where the discrepancies are. Now, we’re going to focus today really on the scanner based counting, because it’s so easy now. But everything we’re talking about also applies to paper based counting. Aside from this non-direct discount, non-direct account won’t work on paper because you don’t have to write down every part number you find for paper based counts.

You’re going to do this directed count or it’s going to generate a list of items. You’re going to print count sheets and you’re going to use that. All right. So the way you do that, the first thing you do is where you create an inventory account card and then you define your count sheets. The count sheet is, you know, if you think of a paper based count, that’s exactly what it is. It’s a place where you going to store what you’ve counted in inventory. And you can define these count sheets by location or by count team.

So if you have two people counting as a team throughout the warehouse or whatever, each one of those will get their own count sheet. And then you can create recount sheets and things like that. But you can define these count sheets any way you like. You can team one, team to Joe Frank, west side of building, east side, whatever you like. You’re going to find those in the way you want to organize your inventory and then optionally, you’re going to generate your count sheets. So generating is kind of like in the business central terminology, they call it calculate inventory.

What that does is goes out and based on your criteria, it adds items to those count sheets and lets you gain print out paper copies of that to give you the list of items to count for a lot. That list of items on the stamps. So if you do want the system to tell you what might be out there to look for, you would do these direct accounts. You would generate those count sheet lines. Otherwise you’re going to leave those count sheets blank because they’re just going to go out and scatter in the front. And now once you’ve generated the count sheets, you can either use the handholds, right?

You go into the count application on the anodes and you start scanning or you print out the count sheets and you walk up to paper and hand it in and somebody does the data entry within the system check. Thank you. There is a third way if you just want to run business central on a tablet or something like that and have a little USB scanner or Bluetooth scanner attached, you can scan directly into the count sheets and boost business central, you know, with some limitations. Right? You have to scan the right item number and things like that.

But I can assure you that as well, I’m it. All right. So that’s basically how you do it. Now, once you’ve done your count, you then go in and you reconcile or validate that count. And if you’re doing a count where you don’t have the items generated for you, you will generate a master sheet, a baseline sheet that tells you these are all the things that we expected to be in in the facility based on the count we’ve done. And it’ll compare everything you’ve counted against that baseline or that master sheet. And then you’ve got a couple of options for reconciling the counters, reports and screens.

I’ll get into it a bit, so reconcile it. You’ll optionally generate recount sheets. So that’s one of the big advantages, is you can have an audit trail of your original count, your recounts and recounts on top of recounts all the way through to gain, eliminate, you know, highlighters and Post-it notes and having to use Excel and all those sorts of things to figure out what you need to go out there and double check. You know, once you’re done, the recount, everything you fix, the quantities, you validate everything, and then you copy the count to the standard business central journals.

So what this does is allows you to have a bit of a segregation of duties, right? So somebody running the warehouse can manage the count, can do all the count, do the reconciliation and figure everything out, copy that to the journals. And then typically somebody in accounting reviews what needs to be posted, and they actually post the differences into the item ledger entries in the jail and everything else. So that’s basically the process. Now to get into more detail of how we set this up, what we do is we go in and again, we create that inventory count cart and typically it’s one count card per location within business entrance, per warehouse location.

Now you can have the count card reference, multiple locations. And where you would do that is if you’ve got in a warehouse location, but you’ve got sort of a virtual warehouse for scrap or return to vendor or something like that. You might want to include all of those locations on a single count because you can reconcile them sort of together. Right? So instead of reconciling account for my scrap location and account for my normal warehouse location, I can kind of reconcile those two things together. And I might see that I’m missing FIFO in my warehouse and I’ve got an extra FIFO in my scrap and it makes it a little easier to reconcile it in those in those situations.

But again, typically one count card is for each location and then each count card has those sheets on it where we can break it up by person or warehouse area or whatever you like. And then each sheet, of course, has multiple covenants. One little note down here, the inventory setup page inventory account setup page sorry, allows you to set the number series on some sheet generation auctions and things like that. Like if you want to add expiration dates to the the county lines when they’re generated and a few other little things that you set there.

All right. So we set up that one of the key things on that inventory account card is what we call the inventory as of day and where the count module works is instead of locking the inventory and preventing you from doing transactions while you’re doing the count, it allows you to do those transactions. You can actually blocks of ends and things like that I’ll talk about in a bit. But the way we do it is by this inventory as of date. So I can start preparing my inventory count a month in advance, especially if you’re doing a direct account where you’re generating a list of items for people to count.

I can start working on that weeks before I’m actually going to do my count and I can say, Hey, my inventory as of date is December 30th. I started working on this on December 1st and I’m doing all this stuff. And then what happens is when we do the reconciliation, we’re doing it based on the date that you specified in the hours of date. So if I do additional transactions on the 31st January 1st or whatever, those don’t count towards the reconciliation. I’m doing. So I can continue to do future transactions and things like that as long as they’re dated after the inventory.

As of date, I can still take my time reconciling that inventory calendar. I can post it after I’ve restarted my normal operations on January 2nd or whatever happens to be okay. Now, one thing you have to be careful of this is it won’t save you if you do a bad count. So for example, if I go and count ten in the bin or I have ten in the bin, I count four. So the system is going to want a negative, just six of those. And then later on I sell ten of those out of that bin.

Well, I can no longer do that negative adjustment. It doesn’t matter what the as of date is. I can’t go negative on a bit. So if you do a bad count and you’re still going to get errors when you try and post, if you try negative adjust quantities out of it, then that will result in a negative quantity because there is no sort of date associated with bin content. Really. It’s either in the bin or it’s not. Okay, So just be careful with that. If you do a bad count, you might still result in errors if you do transactions after the out of date.

Okay. Now when you’re using the as of date, if you’re doing something like I mentioned, where you go in and you prepare your counter ahead of time before you start doing the counter, at least before you start reconciling the count, there’s an option to recalculate the differences that’ll go in and now incorporate any of the transactions that have occurred in time. You created the count sheets up until the as of date. So again, typically, if you’re preparing the count ahead of time, just before you start doing the count, you’ll recalculate differences and now you’ll have the appropriate expected quantities on the count and you’re good to go.

One of the quick note on that, out of date, if you do do transactions are, you know, prior to the hours of date. So let’s say I started counting and then I post the transaction that’s before the out of date or on as of date. When you run the reconciliation will warn you the transactions have occurred and the difference is are going to change. The quantities are going to change because you’ve done transactions within your count period that you’re working in. Now, that one note I mentioned earlier, you can actually block the bin, so you can block bins or bin content if you have bins mandatory so you can prevent transactions from occurring while you’re doing the count or until you’ve completed the count.

And that’s an option on a on a per account sheet basis where you can go in and prevent people from doing transactions in bins if you’ve blocked them. So you have kind of the best of both worlds. You can leave transactions open and you can sort of start operations normally, even though you haven’t finished reconciling a post to an account, or you can prevent people from doing any of that work until you’ve finished reconciling the count. Okay. So let’s really briefly again, talk about count sheets will start that brief, but I’m talking fast, so that’s good.

And you will get a copy of this recording when when we’re done and you can watch it at high speed or something like that or replay it, we actually will get a copy of the recording. It’s done. Now when we’re talking about count sheets, we say generate a count sheet. And as I mentioned, that’s kind of like the calculate inventory within the standard business central capabilities. And you’ll do that in two situations. One, if you’re doing that direct account where the system is telling you these are the items you need to go out and find an account in, you know, in the warehouse or shop or whatever your retail environment, whatever you’re working it.

The other way is when you create that that baseline sheet and I mentioned earlier, what happens is, you know, I’m going to go out and I’m going to count 5000 items out in the warehouse. And if they’re supposed to be 5010 and I didn’t count those ten items, we still need to bring those ten items in to do a reconciliation. So what we do with the master sheet is we bring in all the in on hand inventory in business central onto a baseline sheet so that we can compare what we’ve actually counted to what we expected to be in stock.

And the reason we do that is more for cycle counting and we’re going to focus on the full physical counts again today. But for cycle counting, I wouldn’t do a master sheet because we only want to do the cycle count for the items that we’re directed to count or that we’ve got on those count sheets. So again, the baseline sheet you would typically do if you’re doing a full physical count, there’s a couple of other options, but this is what we typically recommend when you generate those sheets. You can filter them in a couple of different ways.

So as I mentioned, you could do it by team, by warehouse location, whatever those sorts of things are, warehouse area. So there’s two ways you can do it right on the count sheet. You can set some some filters there to limit what is shown on that specific count sheet. And when you generate the sheets, you can apply some transactional filters, like only include items that you haven’t stock or only include items that are out of transaction for a certain period of time, those sorts of things. So there’s two ways we can restrict what items show up on those count sheets.

All right. So with that, let’s actually see what this stuff looks like. So I’m going to go in here. And what you want to look for is insight works, inventory accounts, and of course, you can do the Q and search for that. But I’ve got it here pinned and we open that up and what I’ve got I’ve really got a few accounts created in four different locations. And the way this works is I can be counting multiple locations simultaneously, but I can only have one active count per location. So this is my active count for this warehouse location.

I count for this one. I start a new inventory count for my white location. It’s going to yell at me because I still have one that’s active. And when we’re using the scanner, it’s going to look for the active count and bring that active count up. The nice thing about this is I could have any number of inactive accounts within the system and it keeps the statistics from those prior accounts available. And now you can report on whether your inventory count performance is getting better or worse over time or whatever you like. So we’ve got that full historical information as to what was counted, who counted it, all of that kind of stuff listed in here.

Okay, I’m going to open this one up because this is my advanced warehouse location. And I should mention the advanced inventory count will work with any location configuration. All right. So I’ve got the full directive put away and pick location here. I’ve got some locations without bins and applications have been mandatory with, you know, none of the warehouse stuff implemented any location. I’m going to open this one up and the configuration is all the same. The system handles all of those details for you under the hood on its own. So what you can see here, when I open this up, we’ve got, you know, the general thing, the the number, the description you’ve given, the location that we’re working in and if you leave this blank, you’re going to have different location codes on the lines themselves.

So these are the count sheets. So I can have different locations that I count on this. But in this case, I’m counting the white location. It’s the active count, and this is my As of Date. So as I mentioned, any time I do any reconciliation, it’s going to compare that to the inventory that I had as of this date. Okay. And the posting date can be different than the state. Like, you might want your hours of date to be December 30th, but your posting date to be December 31st or something like that, that inventory as of date, that is what we do.

The reconciliation, There’s some information here that down below is where we’ve got the count sheets. So this again is where I would come in. And again, you can set up this in any way you like. So I could have one for Joe or something like that for him to specifically count for more, more typically, you know, I would only do the recount sheets when I’m ready to do recount, but I can have a list of different recount sheets and things like that here. And when you set that up, if you’ve got bins mandatory again, you can block those bins if you want to prevent transactions from occurring.

While you’re doing that, count, you can block the bin contents or the entire bin or any of the bins that you’ve specified in this this filter. So if you do want to prevent transactions, you use this, and as soon as you generate the count sheets, it’ll block those bins. And as soon as you copy the count to the journals, once you’ve done your reconciliation, it’ll unblock those bins automatically. So again, here, here’s a number of filters you can use to restrict what we actually see on that count sheets. So in this case, team one, it’s completely blank.

You know, I don’t care what bins Team two is going to count these bins. Team three is going to count basically all the other bins within the environment and team one here. I put this zouks here because we want to keep this blank. So I’ve put a sort of a dummy filter in here so that when I generate the count sheets, this team one sheet stays play, but you would put it in whatever reasonable filters you want here. And the only reason I’ve got this year, by the way, is because I am going to generate the count sheets, because I want these two to have a list of items to count.

And I want this one to just start with a blank sheet and they’re going to count everything they find in the area of the warehouse. I send them to. So there’s a number of the filters you can use here. So all sorts of filters you can set and you can also do custom filters. So any filters on the item card or any fields on the item card, you can filter to add any common fields on a stock keeping card. That same on the item card you can filter to, as well as will support stock units or item cards for these these counts.

Okay, So that’s what you’ll do. You’ll set up the organization of these sheets. I’ve got three count teams and this guy named Joe that’s going to do something that you’re going to get rid of. Joe, I don’t want him doing any counts. And this recount sheet, I’m also just going to leave it blank for now. So just going to put a dummy filter in there to leave it like so I’ve got these sheets. This is how I want to organize my count. And then what I’m going to do is I’m going to generate those sheets again.

You could only generate the sheets if you want to tell people what they’re supposed to count. If you don’t, you know, if you’re just going to send them out and say, you know, team one, you count the first wiles team to you, count the next styles and so on and so forth, You would never have to generate these sheets at this point. But what I’m going to do is I’m going to do generate sheets and now we have a bunch of options here. And what I’m going to do is I’m going to include inventory. So these inventory options, these are this is how determines, you know, what transactions or what level of transaction I’m going to include on that count.

So almost always you include inventory, right, Because you want to include what you’re supposed to have in stock on this count and this empty bins activity period is the amount of time a bin can be empty before it sort of falls off the count. So, for example, if I have a bin that’s empty, but it’s had a transaction within the last day, it’s also going to be included on the count. The expected quantity will be zero because in theory that bin is empty. But we’re going to still see that bin show up on the count sheet because we want to verify that it is empty because we have a transaction within the last days.

So maybe it’s not it right. And then there’s active items. What this is, is even if I don’t have inventory of the specific item, if I’ve had a transaction in this case within the last five years, it will add that item onto the count. You know, typically you wouldn’t use five years. I’m using that because I’ve got really old demo data and I’ve got transactions going right back. Typically what you would do something like one month or one week or something like that, and it’s sort of like the empty bins activity period where, yes, I’m supposed to have none in stock of a specific item, but I’ve had a transaction within the last, let’s say one week of of this count.

Well, maybe I want to double check that because maybe I still have an insight. Maybe something went wrong with that transaction or whatever. So this is including items that have had a transaction within the time period is specified here. And I’m going to go five years. You would never do that because that will effectively include anything that’s out of transactions in the last five years. Normally you would keep that to a month or a week or something like that. This inactive items that’s effectively you would use that if you’ve got new items that you want to count but you’ve never had a transaction on.

So it’s inactive items. This will bring in anything that’s never had a transaction right, or any items that have never had a transaction. And I’m going to leave that offer for this particular one. This use skews only what this will do is it will, instead of using your item, start to generate the list, it’ll only look at what you’ve got to set up for stock keeping minutes. So if you’ve got an item in stock, it’s had transactions, but you don’t have a stock keeping in it for. If you’ve turned this on, it won’t include that item on the count.

So it’s only for stock keeping and that’s all it’s going to look at. It’s not going to look at items themselves. And then down here, I’m not going to talk about cycle counts, but when you are doing cycle counts as a whole set of options for doing the cycle counts and you’re good at all I’m going to do is I’m going to run this. I can generate all sheets I wanted to do and still go through, look at all my inventory, look at the transactions, all that kind of stuff, and generates my sheets. So you can see here team one is blank because I gave it a and we count as blank is a filter.

And then team two, we’ve got a combination of 90 items and bins to count four for bin zero to start and then we’ve got 153 bin contents to count for this. And if we drill down on this, just open this up real quick. We can see we’ve got all the items we need to count along with the bin code, the quantity. If you’re doing manual data entry, this is where you would ensure the quantity and the quantity base. You can you can type if you’re counting on multiple units of measure. This is if this is counting in a box and there are six in a box, I would see the base, the shelf number here.

If you don’t have bins, it will bring in the shelf number for that item or that stock keeping in it. And you can also use this to record where you’ve counted something. So, you know, if you don’t have bins mandatory, if you’re in a retail environment or something like that, you can scan a barcode for a shelf number and it’ll track that shelf number. So, you know where you counted it. So if I’ve got five in the back area, I’ve got three by the register and ten on the shelf. I can count those all individually.

It’ll keep track of where I counted them and I do some them up automatically, but also applies to manufacturing environments or smaller warehouses where you don’t have bins turn off, you don’t have to turn on bins to be able to use this. I can either scan the shelf number or bin code, even if I don’t have bins mandatory to track where I’ve counted that item and also tool to allow me to count the same item in multiple places even if I don’t have bins turned off. So that is one of the big advantages of the advance inventory count is if you do have items in multiple spots in your facility and you don’t have bins enabled, you can store count them individually and track those individual, counter that item and it’ll sum it up for you automatically.

Okay. In this case, obviously are bins. So we’re tracking everything by bin and we know by bin what I’m supposed to count and this expected quantity here I go through, that’s what I expect to find of this item in that particular bin and so on and so forth. And then the difference so far and clearly I’ve encountered everything, so my differences are complete. You do have the ability to leave comments on this or if you are both on the handheld and within, is essentially you can get comments if you’ve got issues or want to record why you couldn’t find something or anything like that.

Now I’m going to scroll down here and you can see for those items where we’re able to we can include a lot numbers and serial numbers to count. Now, if this is blank and I count a specific lot number or serial number, you will add a line onto this and track that lot number or serial number. So basically that’s it generated count. It’s brought in wherever loggers or serial numbers that occurred or needed to. And and we’re going to start our count. Now, the nice thing about this as well is either manually if you’re doing a paper count or scanner based count, I can come in here and I can add in new lines.

So this isn’t like the physical inventory journal. I can come in and insert new lines into this and add in additional items that maybe weren’t generated, but I need to to count anyway. Okay. All right. So that’s the count sheet generation. Pretty simple. We come in, you set your filters, you generate count sheets, it tells you what items you need to go out and find and count. And you can either print that out by printing the the inventory count sheets, or you can use the handheld scanners to go in and open these sheets and start scanning those values.

And. Okay. Now just to show you what it looks like real quick, if we don’t have any bins or anything enabled, I’m going to do this because I don’t have a lot of data in the blue location. So now we’re generating count sheets. Exactly the same way. And the difference here is, of course we don’t have bins enabled, so didn’t bring in any of the bins, but we’ve got all the shelf numbers for those items and one of the things I mentioned was the ability to to scan without using a scanner or if you’re just doing manual entry, you can use the quick entry capability within business Central to make it really easy to do data entry.

Right. So at this point here, if I had to enter, it jumps me immediately to the quantity I can type in my quantity, I hit enter again and it takes me back to the item number. So if you have a little bit or if you have a little USB scanner or Bluetooth scanner or something like that and you want to start scanning into the sheet, you can start with a blank sheet scan the item number, it’ll jump you over the quantity, type that in and then I’ll take you back to item number two, scanning it all right.

So that’s just the standard business central quick entry. Every time I enter just jumps me to the field that I need to access. All right. So that is very simply how we generate our count sheets. And again, if you’re doing the full physical count, I wouldn’t do this at all. I wouldn’t provide people a list of items to count. I would just say, Hey, team one, you’re counting these. I’ll go and have them count everything. When we generate count sheets like this, it’s typically, if we’re doing a cycle count because we want to tell them, Hey, these are the 50 items I need to count today to complete my cycle count.

All right, let’s jump back in here. All right. So let’s talk a little bit about that item tracking. I talked I showed you the lot numbers and serial numbers that could get populated on those count sheets. Now, business central for better or worse. Well, actually, for better, I guess, as a ton of different ways you can set up item tracking. So a lot numbers of serial numbers and the way you set it up has a big impact on how business Central handles those lot numbers and serial numbers and of course, how the count module deals with them.

So the first one here, this optional item tracking. Now optional means nonspecific. In this case, you can go into item tracking. I need to have, let’s say, a lot number for every transaction I do. But if you don’t turn on that specific item tracking, then it’s and then it’s optional. Basically. Business Central does not, you know, manage those lot numbers and everything properly. And if you don’t have that specific tracking on or talk about in the next slide, there’s no point in counting lot numbers or serial numbers. So if you’ve got specific tracking on, you want to you need to count log numbers and serial numbers.

If you don’t have specific tracking on, there’s no point in counting lot numbers in serial numbers anymore. More in a moment. So these are the various configurations you can have for for the item tracking log numbers and serial numbers. And again, every one of these situations is handled differently by Business central and the inventory command. Okay. Now, when you generate that sheet, if you do actually generate count sheets, what you’ll find is it doesn’t show you any lot numbers of serial numbers. And the reason is if you don’t have this specific configuration, either of these two specific configurations, you won’t add lot numbers of serial numbers to the count sheets.

And the reason is we don’t know, like if you if you have no bins, that’s fine. We know how many lot numbers of serial numbers you have in a location and we can generate those because they’re not being specific or if we know exactly which law numbers or serial numbers are in which bin we can generate, we can add those lot numbers and serial numbers to the LG because we know, hey, been a has these ten lot numbers in it and then we have these 12 numbers. And if you don’t have that, let’s say you have, you know, item eight and you’ve got you know, item is stored in three different bins and each bin has 30 of items in it and those are all serialized.

Well, we don’t know which serial numbers and which bit. So the only way we can handle that is to generate, you know, every serial number for every bin. You’d end up with 90 calc sheet lines to count the serial numbers. And we know that that’s not good for the employees doing the count. It’s not good for anything. So we don’t do that. So what you need to do is if you don’t have either of these criteria set, when you’re actually out there scanning, you’ll scan a lot numbers, serial number, and it’s just kind of added in as a new line into the into the count sheets.

So will just scandals. And if you’re doing paper based accounts, you’re going to have to record those lot numbers and serial numbers manually or change the report to print the lot or serial number for every bin that that item might be in. So you can just check it off. Okay. All right. And again, as I mentioned, if you don’t have the specific tracking turned on, there’s pointless counting log numbers or serial numbers will do zero good at all. So just don’t do it. Okay. All right. So let’s talk about how you execute the count. So we generated the count sheets.

We’ve got a lot numbers, serial numbers, whatever on there. And now we actually need to go out and do the count. So the way it works is will either print out those count sheets or we’ll just throw scanners of people and say signal count. And if you’re doing the paper based count, of course you can modify the report. But effectively it’s got the item number and the description and the band and all that stuff placed right in the count. And I’ll go and do it. If using the scanners, which I would strongly suggest, because even if you’re doing a directed count, we’ve listed all the items they need to count.

They don’t actually need to scan barcodes to record the quantities so they can just go in, choose that line, hit, enter and type in the quantity. But ideally you have barcodes because then you get the physical verification that they’re actually scanning the item that they’re counting and you’re not going to get miss counts and things like that. So if you and again, the scanner stuff is really cost effective to get into because you can use WLS Express, you can run it on a phone. No, typically I’d recommend getting a dedicated barcode scanner and they start at like 700 bucks and not expensive.

You know, used IBM Express software screen, use the advanced count module or even the basic count, which is the physical inventory journal, and put barcodes on your bins or on your items. And you can go scan those in and your count will go much, much faster. And everything will be way more accurate. So definitely look into barcoding for your inventory count. But again, you can do paper based with the inventory count module, which is how it was originally designed. And it works great way better than anything you do in Business Central. Okay, we’re going to focus on the scanner stuff today.

So once we’ve, you know, the people have their scanners, they can go and they’re going to open up the count sheet they’re dealing with and they’re going to start scanning. So what they’ll do is they’ll scan the bin or the tags. So the tag allows us to record shelf number bin, all that sort of thing, so we can scan in the shelf number or the bin code if required. Then they’re going to scan the item they’re counting. And if the log number or serial number isn’t in the system or isn’t part of the barcode, they can scan that as an option and actually scan the license plate.

I’ll talk about that in a bit. And they’re going to insure the quantity. And entering the quantity isn’t really optional unless the quantity they’re counting is zero. They’re going to enter the quantity. So that’s it to scan the bin and scan the item to the quantity. Or if you’re in a location that doesn’t have bins, you might scan the shelf number and then you’ll scan the item and enter the quantity. So now if there is an existing line on that count sheet, so if if you’re really scanned that item in that bin, it’s going to load up that existing line.

There is a setting there within the the, the device configuration that forces the new line to be created each time. But generally what you want is you want it to find an existing line. You really scan and enter that location, open it up, and then you can edit that quantity where you would turn this on. This is great. New line is if you’re in a location without bins and you can have that same item in multiple places within that environment because each time I scan that item in a new place, I found it. That’s going to create a new line.

Instead of opening up the original line and having me add things together and all that kind of stuff to figure out the quantities. But that’s basically you can scan bin, scan, item, enter quantity. That’s really what you need to do. You just need to be aware of these settings here that can control the behavior, right? Either always creating a new line if you don’t have bins enabled or finding these existing line. And there’s this thing called a fine line template that will control how we find that existing line, whether it’s by band or by item or lot number, serial number, all those sorts of things.

The defaults are typically pretty good. You can just fired up and without changing any settings, it’ll just work. But if you are running through testing and running into issues like Hey, how come one start a new line instead of letting me edit the existing line, there are settings to control. Okay, now let’s talk about the bunch of tags. I’ve talked about this a bit, but you can still scan because even if you don’t have been mandatory set up in your environment, you can create a list of bins or not. And I can scan a bin barcode and record that on the county line.

And the one advantage of that is even if you don’t have bins mandatory, I still may want to segregate where I’ve counted those items again, retail or, you know, production areas or things like that where you don’t want to enable bins because that’s a pain in the butt. But you do want to count that item in different places within that environment. I can still scan that bin or that shelf number and it’ll track where I counted that and allow me to count that same item in multiple places and track where I’ve actually counted. Okay. All right.

And there’s this tag bar code that we have a specific format for that that didn’t include the PIN code in the shelf number. And that is also really nice. If I’ve got a bulk storage area in a large warehouse and my bulk area is, you know, the whole wall back wall of the warehouse, I might want to segregate that one big bin into multiple smaller areas. So if I have to do a recount, I can say, yeah, it was in the bulk storage at position three. So the third pallet over position six or whatever. So you can also use it to segregate those large bins into smaller areas without doing any additional configuration with them.

As a central, we just need this barcode. It tells us that’s been code and this is the specific position within that bin that we scanned right. All right. No, earlier on I said you could scan a license plate. So the way the license plate works is it you can’t reconcile the license plate. You can’t edit the license plate once you’ve scanned it. So what that means is when I scan a license plate in the warehouse, it adds all the contents of that license plate onto the county lines, and I can’t edit those lines. So what we’re doing is just validating scanned on license plate and you’re not going to be able to modify whatsoever.

Okay, So there is an optional right that we can provide for you. It will be available in our add on catalog here shortly that allows you reconcile the license plates and reconcile your pellets before they’re added on to the county lines. Okay. So license plate, you can you can count all of your license plates if you’re using license plate functionality within Insight works. But when you do that count, you’re counting the full license plate. And if you want to edit the or reconcile the contents of that license plate, you do that as you’re doing the license plate count.

Okay. All right. So let’s actually see how all this works. We’re going to go in and record some quantities. So again, the there’s two ways you can do it. If you print it out, you know, sort of the paper based count sheets. Right. What would happen is, is people would hand in their count sheets, achieved two ends in their count sheet. You’ve got somebody sitting there with a ruler on on the count sheet, and they’re just going down and entering the quantities of of everything and where you go. And when they get to the end, if there’s additional information that additional items that the one on account sheet that people counted, you just had them in the way you go.

So that’s one way of ensuring that counts. Again, people hand in the paper, you just walk down the piece of paper and enter the quantities and you’re got to go the other way. Of course, those what we want to focus on, which is with the hand scanners and so what I’m going to do is I’m going to bring up my my scanner here, So I’m going to use this guy here. This is using the default warehouse in sight. And we’ve got the two counts here. So the basic count is using the physical inventory drop. So if you don’t buy the advanced inventory count for use with warehouse and site, you can just use the basic count and you can record your full count against the physical inventory drop over here.

I’ve got this little guy running W Miss Express and it’s also got the Advanced Count module on there. It’s kind of hard to see as I’m focusing, but that’s okay. So the advanced count module is on there as well. If you don’t install the advanced count module, it will just use the basic count and you can use this to count into the physical inventory journal as well. And as I mentioned, you know, if you if you want to get into barcoding and stuff, this is a great little device. It’s about 700 bucks I think to start.

Or you can use your phone and you can start doing inventory counts with no software cost whatsoever using the barcode. And of course, if you want the advanced count that we’re talking about today, there is obviously a software cost for that and there’s no software cost for the stuff running on the scanner. So anyway, what I’m going to do is I’m going to come in here, I’m going to go into my count module and what you’ll see is you’ll see a list of the sheets that are defined, you know, as we’re talking and here’s, here’s the stuff on each count.

So if I’m, you know, team two and I open that up, right? If I open up the count sheet, it’s going to load up everything I need to count on that specific count and you can see the quantities over answered and I scan, you know, the bin I’m looking for, scan the item and enter the quantity. And I’m good. Now, if you’re doing one of those non direct accounts where I haven’t told them which 90 items to count, I just want them to go in and scan everything we find in either one or wherever they’re working.

So what I’ll do and I’m just using sort of the physical keypad here, the arrow keys to select the items instead of tapping the screen. But I’ll grab my team one sheet and pretty obvious it starts out blank because we didn’t add any items to it. And then we do exactly what I mentioned earlier. We simply walk up, we scan event code. And by the way, these these barcodes are generated from our barcode generator sample barcode list report Slovakia generators, a free tool, and you can use it to generate barcodes for testing or, you know, putting on bins or whatever you want.

Anyway, I scanned it in a scan of the item and brought in the lot number and everything for me. So all of this information, if it’s in the barcode, we bring it in, including the unit to measure all of those sorts of things. And we’re good. I just simply enter the quantity that I found in that particular item and lock and we’re good to go. And you’ll notice here it forgot the VIN code between scans. There is a setting to turn that on. So if I’m scanning a bulk storage area or something like that, you would typically have that.

Remember the PIN code. So I scan bulk bin once and then I scan everything that bin. If I’m scanning the if I’m counting the shelves, I want it to forget the bin so that I scan, I have to scan the bin each time I do accounts. I don’t forget to switch which bin? I’m counting it. So when I scan your next bin or whatever and scan, you know, another item that I’m counting. And again, while this one has a picture so you can optionally have a pop up to the picture and then I enter the quantity I found of that item.

And that’s basically how we do it. And this is just adding these items on to that count sheet as we as we scan. So pretty simple. I’m going to scan one more barcode here. So let’s scan the bin. I scan one more barcode here. This is the same item I counted the first time, but a different lot number and I’m going to have to account for that. And that’s magic 45. By the way, if I want to edit this, I can scan that barcode again. If I don’t have that, always add new line on. It’s going to find this and let me edit the quantity.

But in this case I can just enter my keypad here and it brings up that line and I just want to make it different than the line above, so I’ll just edit that quantity or you can use the the menu here to change quantity and all that kind of stuff for add comments or more. Okay. So that’s really how we record the count. Again for physical. This is what I’d recommend. You start with a blank sheet. You send various people down to various areas of the warehouse and you scan everything you find and you’re good.

Alternatively, and typically more on the cycle counts. You go in and you give them a list of items to find and count. The process is the same though. Then item and we’re good to go. And if you’re in an environment where you don’t have bins enabled, you’re not going to see the bin. That’s basically it. So if I bring this guy up, I’m not sharing the screen, but this is a different count. I open that guy up, I can scan the bin code, scan the shelf number, all that kind of stuff to track rough count on it.

But in this case you can’t really see. But it’s just a scan item because I don’t have bins mandatory. I could scan the bin, but I don’t have to. I can just count by item in this case. All right. So that is that let’s go back to this got here. So now that I’ve done my count, I’ve scanned all my items. I’ve I’ve had somebody type in the quantities, all of those sorts of things. I’m going to need to figure out if we did an appropriate counter. So the way I do it is I can look at the line level differences.

It’s line level differences per line that I’ve counted will tell me what the discrepancy is on that line. And there’s a bunch of rules here for how it comes up with that expected quantity. So if it’s been mandatory location, like if I’m supposed to have ten of item A and then one, then my expected quantity is going to be ten. But if I have law or serial numbers enabled and I have the the warehouse tracking enabled, then I’ll see the expected quantity without log number in that specific bin. So I won’t necessarily see ten vitamins and bin one is expected quantity.

I’ll see three of lot number five prior to me in that bin or whatever it is. So these are the rules I’m not going to go through in detail. That expected quantity is what we’re going to reconcile against on a per line basis. But the per line reconciliation is okay, but it’s not ideal because let’s say I counted zero in bin one, but I counted ten and been two. I want to see a combination of those because I’m supposed to have ten in stock. Yeah, I just counted it in different bin. I’m actually not short ten.

If I look at just the single line, it’ll say I’m short ten. I want to look at the, the combined differences across all accounts. Right. So ten one may be counted, none of them two on the other side of the warehouse, kind of ten when they weren’t expecting to count any in total. I’ve got exactly the quantity I want. They’re just in different areas. So I want to reconcile at a much higher level. I want to reconcile all the sheets together. So the way I do that first, as I mentioned, is I create a master sheet and the master sheet goes in and gives me that baseline to reconcile my count against, okay, so brings in all the quantities that we need that are on hand and lets me what I counted to those those quantities.

And there is another way you can do it as well. There’s an on counterpart support that you can use to go in and list any items that don’t appear on any count sheets. So this is an optional way of doing it, because if I’ve scanned everything in the warehouse, I don’t need to generate a master sheet so I can use an counterpart’s report to go ahead and give me a list of items that weren’t counted. And then I can add those to accounts sheet and have somebody go try and find them. Okay. But typically you’re going to generate a master sheet and a master sheet is what we reconcile against.

Okay? Once you’ve got the master sheet and everything to find, we’re going to run some different analysis reports. And there’s two ways we can do it. There’s the count difference analysis report. So there’s an actual report you can print or send to Excel, that sort of thing. And that’ll give me my totals and my discrepancies. Or we can use a count difference summary page, which is just a page. It gives me a list of all the discrepancies and they both, you know, reconcile my lot number and serial number both give you the same information. The counter from summary is nice because you can exporter to excel, you can manipulate it and see things a little differently if you want to look at things a little differently.

Okay. Now, once I’ve my analysis, if I find that I’ve got a lot of discrepancies, the next thing I want to do is go in and do a recount and a recount sheet allows you to go in and set a threshold for discrepancies. So I can see anything that’s up by more than 5% or anything that’s up by more than $100 automatically. Add that to a recount sheet form and a recount sheet is going to just be a list of those items that I need to go out and double check. So it’s kind of like that directed count.

I’m going to get a count sheet that says, you know, here’s 50 items that somebody needs to go out, find and recount. And then what it will do is it’ll keep the original count quantities. So we’re not actually editing the original company. We’re creating a new line with a new count quantity. And if that recount is no good, I can create another recount to create another line. And I’ve got that full audit trail of all the recounts. So that’s really handy. And we can do it a couple of ways. We can use the generate recount sheets report or we can do a sort of a spot check where we can go in and just choose certain items and flag them for recount.

And that’s great if you have auditors and things like that, because they’ll say, hey, can you randomly spot check these three items, generate a recount sheet and you can see that that full audit trail of it. All right. So let’s see how that works. I’m going to go in here. I’ll use this count. And by the way, after scanning, I just hit refresh on this is a central. So you’ll see the the additional lines that I counted as soon as Business Central decides to refresh. Those are the three items again. So again, typically what we would do at this point is I create long, I call it baseline.

That’s my preferred master and create my baseline sheet or my master sheet. And I’m going to bring in everything that I need to reconcile against. Right. So the way we do this is I create that and you have to be careful here. So quite often I’ll recommend you create the baseline sheet before you start your inventory count, because you don’t want to accidentally wipe out everything you’ve counted. Okay. So what I’m going to do here is I’m going to come in and say, generate my baseline sheet for, you know, everything that I have in stock or everything that that transaction against.

Typically when you do the baseline, you’re just going to do everything you have in stock because that’s what you need to validate against. What do I have in stock that I need not have counted? So I’m going to generate this and we’re going to come in and do my baseline and it’s going to generate that sheet first real quick. And now I can do my reconciliation. So, you know, I’ve got these items that I need to compare my count against. And so what I’m going to do first step is going to run the count difference analysis.

And there’s a bunch of options you can set here, like during the description and details and all those sorts of things. But what I’m going to do is I’m just going to leave this, but I am going to show the item tracking differences and I’m going to show any serial numbers I didn’t count and any lot numbers that I had issues with. Just to show you what that looks like and you can filter things out here. There’s a whole bunch of stuff you can filter out, but I’m going to do print preview and it’s going to run my analysis for me and tell me how bad or good like how it works.

And this isn’t really exactly rocket magic. Well, this is a pretty terrible count. Is this first item here? I’m sure $1,000,000. Next item, 118,000, and so on and so forth. So you can see it does it based on the absolute value here. So this one, I’m short 8000, this one I’ve got an extra 8000 these to my offset each other. Right. So it will look at both plus and minus differences and sort them in a descending view. So you can see the main things you need to focus on. And if we go down here, here’s a log tracked item and it tells me I’m short 600 of these and it gives me the breakdown of which log numbers are short and so tells me that I’m short these two lot numbers.

And if we go way down and the serial numbers, same thing that we find. So here’s one here. This is one of the ones that I counted with the scanner. It tells me I count an extra 39 of lot number one, an extra 180 of lot number two. And I’m short all these other items now the nice thing about this is when we post this, it’ll actually post those differences for me automatically. I don’t have to do anything special with these lot numbers or serial numbers. It will add those into the item journals and post the adjustments for log numbers and serial numbers automatically.

And then the one last thing to show you on this, the bottom, the totals, the thing to look at is the total absolute difference when you’re doing this reconciliation, because this tells me my total variance on that count. For example, let’s say I had you know, if I looked at this, I had a total difference of $0. But I have one item that I counted an extra $50,000 worth and a different item that I was short, 50,000. Well, those both add up to zero. So it looks like my my total difference is zero. I did a great count, but the absolute value would be $100,000 difference because that’s what I had.

I had $50,000 difference in $150,000 difference on another. So this is the total to look at to see how good or bad recounts. Okay. Now, once I’ve done that analysis and the count difference summary is the same thing. It’s just a page. The nice thing about this, again, it blows it out and then I can come in and if I’ve got item tracking, it’ll show me the serial numbers or log numbers or for whatever for those specific items down here, find one just to illustrate that. Right. So show me any serial number or log number differences and I can come in here if I use this will show me those differences right on the other lines themselves.

Right. So anyway, you can use this as well to do that reconciliation, export to Excel or whatever you like. Okay. Now once I’ve done that, if I’ve got a really bad count, what I want to do is I want to generate these recount sheets and the recount sheets, as I mentioned, can come in here and we can say, you know what, I’m going to add everything to my recount sheet one and anything that’s out by more than $500, add it to recount or if it’s off by more than 10% added to the recount. And I’ll use this and it will either reconcile based on the total difference for the item or it’ll create that recount based on the difference on that specific count line.

And so normally it’s my number and it’ll give you a list of items that you need to go out and recount. I run those because pretty much every one of my items is going to fall within this threshold and it’s going to add it to the recount. The other way of doing recounts, as I mentioned, you can do a quick spot check. So I can say, you know what, this one was was really bad and and this one was really bad. And maybe this one. I select those three items, copy those to the recount sheet, and we’ll add it to recount one.

And now what happens when you have a recount? What it does is I can’t edit the original count on it. It at me and tells me it’s on a recount sheet. And I actually have to open up that recount to actually recount that specific item. And and again, we get that audit trail when we’re on the reconciliation report, it’ll show me the original count, finally show me the recount, all of those sorts of things, automatic. So that’s how you eliminate the Post-its and highlighters and everything else. I send somebody over the scanner to scan these items or print this count sheet.

They double check it and and then we can see if we’ve done any better or not because we got one last section to cover and that’s on the posting. So to post this within the count card, there’s these five options that you have. The first one is you’ve got this set. You will copy the lot numbers and serial numbers to the journals. That’s where you want. If you want it to automatically reconcile your log numbers and serial rate, the batch document numbers, typically you leave that off. But if you’ve got a number series on the item journal batch, it’ll use that to to generate the document number.

But typically you leave this off because it’s going to use the count card number as your document number for you all your physical inventory card, your entries and all your item ledger entries as well, and warehouse entries post zero differences. If you’ve got a no discrepancy on an item that’ll still create an item. Ledger entry and physical inventory ledger entry for that item just to indicate that you’ve actually counted it. So typically you would leave this on for the most part, and that will also allow you to adjust the physical inventory count period code for cycle counts as well.

Even you’ve had no discrepancies on that time. And then this update next count period, that’s scan, if you’re using the physical inventory account period code and the next start date and end date for your physical inventory accounts for your cycle counts, that’ll update. Also. It’s not a bad idea to leave those on as well. And then finally, on the dimensions, you can set custom dimensions to get posted as well. So a lot of people will use or dimension for inventory count or some sort of adjustment dimension. You can set those. There’s another field on there, you can set those custom dimensions and then you can turn this off if you just want to use the custom dimensions or you leave this on and leave the default dimensions, plus your custom dimensions.

So that’s all you need to set for that. Once you’ve done that, you copy the count to the journals and then you post them from the journal. Now there is a re class journal that sometimes gets created and the idea behind that is if I am supposed to have a lot number and stock, but I count log number B and there’s no quantity differences. There’s just a lot number difference. It can do a re class journal to convert log number eight, log number B, So there’s specific scenarios where that’ll happen. Like if it’s in the same bin and it’s the same quantity for the log numbers, things like that, it’ll generate a request, but typically it’s going to generate the physical inventory.

Journal If you’re using the directive put away, in fact it’s going to generate a warehouse physical inventory journal as well, and then you’re going to post those two together. So you never have to calculate warehouse adjustments if you’re using directive put away, you know, it’ll generate that journal for you automatically. Now the log and serial number handling, we talked about this already, so I’m going to skip most of this again, just to reiterate, if you don’t have that specific tracking, turn on don’t count log numbers or serial numbers. It’s useless. Business Central does not care and won’t work properly anyway.

Okay. All right. Now before you post, we have a test report that you would run. This is set in the inventory inventory account setup and the test report gives you a much better way of validating that those entries are going to post because it’ll check for errors before you post. There’s nothing worse than going in and posting 10,000 lines and you get to line 9900 and you get an error that it won’t post and then you fix that line and then you post again and line 9901 doesn’t post. So this test report will validate if you a high degree of confidence, you’re actually going to be able to post that journal.

Okay. All right. So let’s look at that real quick. So again, if I want to post this now, what I’ve got, this is Director Porter Way location. So I’ve got a physical inventory journal match in a warehouse, physical inventory drill match. All I would do is say copy the account to the journals and it’s going to use those patches. I can come in here, I can change the posting date and all that sort of thing and change some of the options, but I’ll leave the defaults in. Okay. And what it’s going to do, it’s going to say, Hey, well, I’ve really got entries on that journal.

I’m going to delete them and it’s going to go in and it’s going to move everything over to those journals for me automatically. Okay. And again, with directive put away, I don’t I will post to the physical inventory journal in the warehouse, physical inventory journal. I don’t have to do calculate warehouse adjustments or anything like that. That’s right. Now generating this. It’s adding all the serial numbers and log numbers, all that kind of stuff. And it says, Hey, you’re done. Do you want to deactivate the account? If I say yes, what that does is it marks it as inactive and this account is effectively archived.

Now, the next step would be for somebody to go in and actually post that journal. So this is where you would typically have somebody in accounting come in, run the test report and then post. And just to show you what that looks like, if we look at the test report, the one you want to run is the one that’s the Insight Works test report, because it’ll show you which items may not post and you can run it to show only the lines with errors on them. And that will give you a short list of lines you need to fix up before you can actually post.

Otherwise, it’s a standard test report. Gives me my totals everything else and in a way I go. So nothing really too special about that except if there is an error would flag these items and indicate that an item would not be able to post because it’s missing something. Right. So this one likely is it’s been set up incorrectly. It’s missing item tracking lines so we can just this this line wouldn’t post if we try to post it would fail. So I can fix that up before I do anything else. Okay. Now at the bottom here, it gives us our totals.

1 hour This total here, it’s the same total as if you run the standard test reportable as a central and this may not match 100% what the difference analysis report gives us. Difference analysis report uses average cost. This uses the actual cost that’s going to post to the journal. It shouldn’t be a significant difference. It might be one or 2%. But just to be aware that this may not match exactly what you see on the count difference is that using average cost, this is using the cost that’s calculated when we add those items to the Journal.

And at this point I would just post and where I go just to illustrate the log numbers and serial numbers and our here’s an entry where we’ve got an adjustment and if we open that up, it’s brought in the log numbers that need to be adjusted and everything automatically. I don’t have to generally touch any of that. All right. Okay. So that’s basically it. That’s how we complete the count. Copy that account to journals. Somebody posts it and we’re good to go. Quick summary to execute account, you create the account card and the account sheets.

You can optionally generate the account sheets for a list of items to count. Once you’ve done your count, you generate the the baseline sheet or before you do the count, you generate the baseline sheet, you reconcile it, you copy the count and you post. That is your entire process for doing the count. Okay? Now if you need more information, you can go to inventory for Dynamic Starcom. We’ve got some additional videos and things like that. One of the key places to go, if you go to the website at the top, there’s a support link where you can get access to the knowledge base, the knowledge base as a user guide for this, a bunch of other information about the advanced inventory count if you need help.

And one thing to note on that support, our support office is closed over the holiday break at the end of the year when a lot of people might be doing their workouts. We do have people monitoring support for people that are having issues with inventory accounts, but I would strongly recommend if you’re doing your inventory count at the end of the year, you do a test run to practice, make sure everything works for you 100% before you go off over the holidays and try and do your inventory counts. All right. Thanks for attending everyone. Hope you have a great rest of the week.

Questions about this webcast?

Send your question and the Insight Works team will reply by email. Ready to plan a project? Contact your Microsoft Partner.

Ask a question

Webcast Questions