Warehouse and Inventory Moves for Microsoft Dynamics 365 Business Central
Stock moves all day: a pick face runs low, two partial bins get consolidated, a pallet turns up in the wrong place. Some of those moves are planned in Business Central and many are not. Warehouse Insight handles unplanned ad hoc moves, directed warehouse movements from the movement worksheet, and inventory movements for standard warehousing setups, with every take and place confirmed by scan and posted to Business Central.
How Warehouse and inventory moves works in Warehouse Insight
- For an unplanned move, the worker opens the ad hoc move application; no document exists in Business Central beforehand.
- The worker scans the source bin and the item, and enters the quantity.
- The worker switches to place mode and scans the destination bin, and the move posts as an item reclassification journal or warehouse reclassification journal, depending on how the location is set up.
- For planned moves, a planner or supervisor creates movement documents from the movement worksheet in Business Central, usually to replenish pick bins from bulk storage.
- The worker opens the assigned document on the device, which presents a warehouse movement or an inventory movement according to the location setup.
- The worker scans to confirm each take and place, then posts the movement from the device.

Key capabilities
Ad hoc bin-to-bin moves
No document is needed. The worker opens the ad hoc move application, scans the source bin and the item, confirms the quantity, switches to place mode, and scans the destination bin, and the move posts. It suits unplanned replenishment, bin consolidation, and any move without a pre-generated document.
Directed warehouse movements
Planned moves, such as replenishing pick bins from bulk storage, are created in the movement worksheet in Business Central and appear on the device as assigned tasks. The worker follows the scan-to-confirm steps and posts from the device when the movement is done.
Inventory movements
At locations set up for standard warehousing, inventory movements run through the same directed movement application, with the same scan, confirm, and post steps.
License plate moves
In the ad hoc move application, scanning a license plate, the barcode label that tracks a pallet or container as one unit, moves everything on it to the new bin in one step, with no line-by-line scanning. License plates require License Plating, a separately licensed app that works with Warehouse Insight.
Moves between locations
Ad hoc moves can go from one Business Central location to another, not only between bins in the same location. The worker scans the destination location barcode before scanning the destination bin.
Splitting a quantity
When one take quantity has to go to several destination bins, the worker copies the line on the device to split it, without going back to Business Central.
Inquiry inside the task
Bin inquiry and item inquiry open from within the movement application without leaving the move. If a bin label is damaged, the worker can enter the bin code by hand.
See Warehouse and inventory moves on screen
Real screens from Warehouse Insight, shown with demo data.
Details that matter on the floor
No separate setup tool
The scan sequence, the fields shown on the device, auto-post behavior, quantity defaults, and available menu options are defined in the device configuration pages in Business Central and read by the device when the application loads. There is no external portal to maintain.
No document for unplanned moves
Because the ad hoc move application needs no document, a worker can move stock as soon as the need appears, and the move is scanned, confirmed, and posted before the worker returns to a workstation.
Who uses Warehouse and inventory moves
Warehouse associates
Use ad hoc moves for daily unplanned transfers: refilling a forward pick location from reserve, consolidating partial bins, or correcting a misplaced item without paperwork.
Planners and supervisors
Create directed movements from the movement worksheet in Business Central for larger, scheduled replenishment runs, which then appear on workers' devices as assigned documents.
Forklift operators
Work directed replenishment out of bulk storage and relocate full pallets by scanning the license plate rather than each item on it.
Questions about Warehouse and inventory moves
What is the difference between an ad hoc move and a warehouse movement in Business Central?
An ad hoc move has no prior document: the worker starts it on the device by scanning the source bin, the item, and the destination bin. A warehouse movement is a directed task generated from the movement worksheet in Business Central, typically for planned replenishment between bulk and pick bins. Warehouse Insight supports both with the same scan-to-confirm steps.
Can workers move entire pallets with a single scan?
Yes, if the pallet has been built as a license plate. In the ad hoc move application, the worker scans the license plate barcode, the plate and its full contents are reclassified to the destination bin, and Business Central is updated.
Can Warehouse Insight move inventory between locations, not just between bins?
Yes. In place mode, the worker scans the destination location barcode and then the destination bin. Later bin scans in the same session use the new location automatically, so several lines going to one location need only one location scan.
Where is the movement workflow configured?
In Business Central. Scan behavior, quantity dialog defaults, visible menu options, auto-post settings, and the columns shown in the movement document are all set in the device configuration pages, with no separate configuration tool.
Does Warehouse Insight handle inventory movements as well as warehouse movements?
Yes. The directed movement application handles warehouse movements, used with directed put-away and pick setups, and inventory movements, used in standard warehousing setups. The device shows the document type that fits the location's configuration in Business Central.
Related Warehouse Insight features
All Warehouse Insight features →Part of Warehouse Insight
Improve warehouse accuracy and boost efficiency with mobile device and barcode integration.
Have a question about Warehouse and inventory moves?
Send us a note and the Warehouse Insight team will reply by email. Ready to plan a rollout? Contact your Microsoft Partner.

