Skip to content
Warehouse Insight app iconWarehouse InsightInventory

RFID Scanning for Microsoft Dynamics 365 Business Central

A barcode needs line of sight, so a pallet of tagged goods still means one scan per item. With radio-frequency identification (RFID) hardware, Warehouse Insight reads every tag in range while the worker holds the trigger, removes duplicate reads, and posts the results to Business Central.

How RFID scanning works in Warehouse Insight

  1. The worker opens a receiving, count, or shipping document in Warehouse Insight and presses Scan RFID.
  2. Holding the trigger, the worker passes the reader over the goods or storage area, and the reader captures every tag in range.
  3. The device collects the tag data, removes duplicate reads, and passes the list of unique tags to Warehouse Insight.
  4. Warehouse Insight resolves each tag to a Business Central item through the GS1 barcode rules, or through a cross-reference for tags without GS1 data.
  5. The identified items and quantities appear on screen, filled in against the purchase order lines, added to the count sheet, or matched to the shipment.
  6. The worker reviews the results and confirms, and Warehouse Insight posts them to Business Central.
Video thumbnail: RFID scanning in Warehouse Insight
RFID scanning in Warehouse Insight A look at reading RFID-tagged items with Warehouse Insight and posting the results to Business Central.

Key capabilities

Many tags in one pass

The worker holds the trigger on an RFID-capable device and the reader captures all tags in range. Warehouse Insight identifies each unique item and shows the results on screen; the worker reviews them and presses Finish to update the Business Central document.

Items from GS1 barcode rules

Tags encoded with GS1 data are decoded by the same barcode rules Warehouse Insight uses for a GS1 barcode scan, so workers never handle raw tag identifiers. A tag without GS1 data, such as a bare serial number, is matched to an item through a cross-reference set up once in Business Central.

Duplicate reads removed

Holding the trigger over a group of items can read some tags more than once. Warehouse Insight removes the repeats and reports only unique tags, so workers see item quantities rather than inflated read counts.

Receiving against purchase orders

The worker opens the purchase order in the receiving application, presses Scan RFID, and holds the trigger over the inbound goods. Warehouse Insight fills in receipt quantities on the matching lines, and the worker reviews and posts.

Shipping

From the shipping application, the worker starts an RFID scan over outbound goods, and Warehouse Insight matches the reads to the shipment. It is suited to palletized shipments; a packing station with several orders staged close together needs more care with tag placement and reader range, and Insight Works can help scope that during setup.

Inventory counting

The worker opens a count document, starts the RFID scan, and holds the trigger over the storage area. Warehouse Insight adds the identified tags to the count sheet and updates the Business Central count document, without item-by-item scanning.

Serial numbers from tags

Where serial numbers are encoded on tags, Warehouse Insight records them during receiving or counting. Serial capture can be turned off for operations that do not track serials, without affecting the rest of the RFID workflow.

Compatible hardware

RFID scanning needs an Android device with RFID reading built in or provided by an attached sled. Your Microsoft Partner or Insight Works can advise on current hardware options and compatibility.

See RFID scanning on screen

Real screens from Warehouse Insight, shown with demo data.

Details that matter on the floor

No separate RFID item mapping

A GS1-encoded tag carries the same fields as a GS1 barcode, such as the GTIN, serial number, and lot number. Because Warehouse Insight reads those fields with the barcode rules already in place, tagged items that carry GS1 data need no RFID-specific setup per item.

Where RFID fits

RFID gives the most reliable reads when tagged items are grouped together and away from other tagged stock, and when tags carry GS1 data from the vendor or manufacturer. Product density and packaging can affect read range, and Insight Works can advise on tag placement and reader settings for your product mix.

Who uses RFID scanning

Receiving teams

Receive goods tagged at the item or case level with one trigger hold instead of scanning each item. This is common in apparel, footwear, retail, pharmaceutical, and other industries where vendors apply RFID tags.

Inventory teams

Run cycle counts in dense storage where line-of-sight barcode scanning is impractical, covering more inventory in each pass.

Operations managers

Introduce RFID for the items that carry tags while barcode scanning continues for everything else, in the same Warehouse Insight deployment.

Questions about RFID scanning

How does Warehouse Insight identify items from RFID tags?

Through the GS1 barcode rules already set up in Warehouse Insight. A tag encoded with GS1 data carries the same item identification fields as a GS1 barcode, and Warehouse Insight matches them to the Business Central item. A tag with only a bare serial number is matched through a cross-reference set up once in Business Central.

Does RFID scanning need separate item setup in Business Central?

Not for tags that already carry GS1 data, which use the existing barcode rules. Tags without GS1 data need a one-time cross-reference in Business Central, and RFID needs initial setup in Warehouse Insight before first use; your Microsoft Partner or Insight Works can guide that setup.

Does Warehouse Insight handle duplicate tag reads?

Yes. When the reader captures a tag more than once, Warehouse Insight removes the repeats and counts only unique tags, so the quantities on screen reflect unique items before the worker confirms and posts.

Which Warehouse Insight workflows support RFID scanning?

Receiving against purchase orders, inventory counting, and shipping. Workers start RFID scanning with the Scan RFID button in those applications, and the results fill the active receipt, count, or shipment and post to Business Central once confirmed.

Does RFID scanning support serial number tracking?

Yes. Where serial numbers are encoded in tags, Warehouse Insight records the serial data during receiving or counting. Serial capture is configurable, so operations that do not track serials can turn it off.

Warehouse Insight app icon

Part of Warehouse Insight

Improve warehouse accuracy and boost efficiency with mobile device and barcode integration.

Have a question about RFID scanning?

Send us a note and the Warehouse Insight team will reply by email. Ready to plan a rollout? Contact your Microsoft Partner.

Ask a product question

Product Questions