Skip to content
Warehouse Insight app iconWarehouse InsightLicense plates

Pick and Ship License Plating for Microsoft Dynamics 365 Business Central

Outbound time builds up in three places: building the pallet during picking, checking it again at shipping, and producing the carrier label before the driver arrives. With Warehouse Insight, pickers build license plates, barcode labels that track a pallet or container as one unit, as they pick, and the shipping worker confirms each pallet against the warehouse shipment with one scan of its label.

From the same device, the shipping worker can then create the carrier label through Dynamic Ship, Insight Works' shipping app. License plates come from License Plating, a separately licensed Insight Works app that requires Warehouse Insight.

How license plates at picking and shipping works in Warehouse Insight

  1. In the pick aisle, the worker opens the pick document and chooses Start License Plate, or scans a template barcode, to create the first plate.
  2. The worker picks from each bin and scans the items onto the plate, and each scan adds the item and quantity to both the pick document and the license plate record in Business Central.
  3. When the pallet is full, the worker chooses Stop License Plate, confirms the print prompt, applies the printed label, and starts the next plate if needed.
  4. At the shipping staging area, the shipping worker opens the warehouse shipment and scans the label on each pallet, and Warehouse Insight confirms all items and quantities on that plate against the shipment lines.
  5. With every pallet confirmed, the worker opens Dynamic Ship from the menu, selects the carrier and service, and the carrier label prints to the dock printer.
  6. The worker posts the shipment, which closes it in Business Central.
Video thumbnail: License plates at picking and shipping
License plates at picking and shipping A video on building license plates during picking and confirming them at shipping in Warehouse Insight.

Key capabilities

Build plates while picking

Workers choose Start License Plate from the pick application menu, or scan a license plate template barcode, and keep picking, scanning items onto the plate as they go. Pick lines from different bins can go on the same outbound plate.

Several plates per pick run

When a pallet is full, the worker chooses Stop License Plate, prints and applies the label, and starts the next plate. Each plate has its own barcode and contents in Business Central.

Shipping by a second worker

The pallet moves to the shipping staging area with its label attached, and a different worker can handle the shipment later. The license plate carries the confirmed contents from picking to shipping, with no paper handoff.

One scan per pallet

The shipping worker opens the warehouse shipment on the device and scans the license plate label. Warehouse Insight confirms every item and quantity on the plate against the shipment lines at once, so a multi-pallet shipment takes one scan per pallet instead of line-by-line confirmation.

Partial plates at shipping

When only part of a plate belongs to the current shipment, workers choose one of four options: create a new plate for the unused items, remove the excess from the plate, remove only the used portion, or unbuild the plate. The default option is set in the device configuration in Business Central.

Carrier labels through Dynamic Ship

With a menu item for it added to the device, workers open Dynamic Ship after the pallets are confirmed to create carrier labels for FedEx, UPS, and other supported carriers, along with packing slips and bills of lading. The label prints to the dock printer.

Photos before pickup

Workers photograph completed pallets from the shipping application before they leave the dock. The photos are attached to the warehouse shipment in Business Central as a condition record for carrier damage claims.

See license plates at picking and shipping on screen

Real screens from Warehouse Insight, shown with demo data.

Details that matter on the floor

No second count at the dock

The picker confirmed each item in Business Central while building the plate, so the shipping worker confirms the pallet by its label instead of rescanning its contents.

Contents carried between shifts

When picking and shipping run on different shifts, the license plate holds the confirmed pallet contents from one shift to the next, without a paper handoff.

Shipping steps on one device

Confirming the pallet, creating the carrier label through Dynamic Ship, and posting the shipment all happen on the same handheld, instead of confirming contents and then entering shipment details in a separate carrier system.

Who uses license plates at picking and shipping

Warehouse pickers

Build outbound license plates during pick runs, filling pallets or boxes and printing their labels before dropping completed loads at the shipping staging area.

Shipping staff

Confirm each pallet at the dock door with one scan, open Dynamic Ship for carrier labels, and post shipments from the handheld.

Operations managers

Set license plate behavior, posting controls, and Dynamic Ship carrier options in Business Central.

Questions about license plates at picking and shipping

Do pick lines need to come from the same bin to build an outbound license plate?

No. Items from different bins can go on the same outbound plate, so a picker moving through several bins in one pick run adds each item to the same pallet. This differs from building license plates at receiving, where all lines must share the same bin.

Can one pick document build multiple license plates?

Yes. Workers start and stop license plates as many times as needed within one pick document. When a pallet is full, the worker stops the plate, prints its label, and starts a new one, and each plate has its own barcode and confirmed contents in Business Central.

How does the shipping worker know which shipment a license plate belongs to?

The license plate barcode links the pallet to its warehouse shipment in Business Central. When the worker scans it in the shipping application, Warehouse Insight identifies the shipment and confirms the plate's contents against the shipment lines, with no search by document number or customer name.

What happens when only part of a license plate belongs to the current shipment?

The worker chooses one of four options: create a new plate for the unused items, remove the excess from the plate and leave it in the bin, remove only the used portion, or unbuild the plate. The default option is set in the device configuration in Business Central, so a warehouse with a consistent policy sets it once.

Is License Plating included with Warehouse Insight?

No. License Plating is a separately licensed Insight Works app, and it requires Warehouse Insight. The licensing FAQ lists what each app needs.

Warehouse Insight app icon

Part of Warehouse Insight

Improve warehouse accuracy and boost efficiency with mobile device and barcode integration.

Have a question about license plates at picking and shipping?

Send us a note and the Warehouse Insight team will reply by email. Ready to plan a rollout? Contact your Microsoft Partner.

Ask a product question

Product Questions